Value of used TREX 450 Pro
#1

Thread Starter
Join Date: Dec 2002
Location: Peabody,
MA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts

Hello all,
I new to heli's and this will be my first one. I don't plan on any 3D flying just scale as I do with RC airplanes. I know this heli may not be the best to start out with, but I would like to have a larger heli for stability and I'm pretty patient and will start off real slow. I found this Heli on Craigslist and would like some advice on the value of the heli and what the average person should pay for this since with the limited research I've done it seems to be discontinued, in my mind since it"s discontinued I wanted to offer $250 is that unreasonable. He's asking $350 or B/O I'll list the items he has on the ad.
Thank you,
Pat
Ready to fly RC Helicopter Align Trex 450 Pro with the followings:
• Align 450M Brushless motor
• Three (3) Align DS410M digital servos for the aileron, pitch and collective (eCCPM setup)
• Align RCE-BL35X speed controller with built-in BEC
• Align GP750 gyro with associated Align DS520 digital tail servo
• Spektrum AR6110e DSM2-6-channel receiver
• Three (3) Lipo 2200mAh batteries 35C
• Carrying Tote
• Several extra parts (not all included in pictures)
All you need to fly the heli is to bind your radio to the receiver.
$350.00 obo
I new to heli's and this will be my first one. I don't plan on any 3D flying just scale as I do with RC airplanes. I know this heli may not be the best to start out with, but I would like to have a larger heli for stability and I'm pretty patient and will start off real slow. I found this Heli on Craigslist and would like some advice on the value of the heli and what the average person should pay for this since with the limited research I've done it seems to be discontinued, in my mind since it"s discontinued I wanted to offer $250 is that unreasonable. He's asking $350 or B/O I'll list the items he has on the ad.
Thank you,
Pat
Ready to fly RC Helicopter Align Trex 450 Pro with the followings:
• Align 450M Brushless motor
• Three (3) Align DS410M digital servos for the aileron, pitch and collective (eCCPM setup)
• Align RCE-BL35X speed controller with built-in BEC
• Align GP750 gyro with associated Align DS520 digital tail servo
• Spektrum AR6110e DSM2-6-channel receiver
• Three (3) Lipo 2200mAh batteries 35C
• Carrying Tote
• Several extra parts (not all included in pictures)
All you need to fly the heli is to bind your radio to the receiver.
$350.00 obo
#2
Senior Member
Join Date: Feb 2008
Location: Swansea,
MA
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts

Ask if it's been crashed, how hard it was flown, how old is it etc. the basic price in MHO is fair if you can get it for less GREAT !! They are not all that old they still sell clones with the "pro head" Align has gone with the DFC head. ASK FOR PICTURES and check them out. If you can forward them for others to look at & offer further opinions. But by what's listed hell I'd buy it if I had extra cash to replace my old Trex 450. Do you have a radio already ??
Hope this helps
Hope this helps
