Tamiya ClodBuster ESC issues
 

I have the TEU-106BK ESC. I am using a Futaba T3PRKA transmitter. The connector for the ESC is plugged into Channel 2 on the receiver. I am using a Venom 7.4V 2C LIPO. I turn the Transmitter on first, then the truck. The light on the receiver is green. The light on the ESC constantly blinks. I do not have the instructions for the ESC and was unable to find them online. I Found instructions for the 105BK and tried to do the setup but the light just blinks. The connections to the motors are disconnect when trying to do the programming. When the wires are connected and the radio and truck is on, the steering works but nothing out of the motors. Bad ESC?

Probably late to respond, but it does sound like ESC needs to be set up. Another thought, is that ESC made to run 2 motors?