Vertical line Trimming Question
Don,
Have a trimming question for my 2M Arresti III. On long verticals, it pulls slightly to the canopy. Not a lot, just enough to be annoying. Normally, this would say I need more downthrust. However, this airplane needs minimal down elevator for inverted flight, regardless of power setting, and is probably the best I've had in this respect. Power-on to power-off transition when upright is great; the nose drops VERY slightly when upright. I have a slight low throttle to down elevator mix for downlines. Any ideas what to do about the canopy pull in verticals? Jon Lowe |
RE: Vertical line Trimming Question
Jon,
Thanks for the question. Suggest putting some down thrust in. The fall/or rise of the nose during inverted is more of a CG adjustment. It sounds like your CG is close- it should drop some when inverted. Best of flying! Don |
All times are GMT -8. The time now is 12:02 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.