How difficult would it be to make a led system for my heli fuse with two blinking strobes and 1 red and 1 green continous glow nav lights.? and what would I need beaides the actual LED's themselves? Thanks in advance, Rotten

I believe that this combination might be available from rc-lites.

[link=http://www.rc-lights.com/]http://www.rc-lights.com/[/link]

Here's how I made nav lights for one of my planes. With a little bit of a modification, you could adapt it for your project:
http://www.rcuniverse.com/forum/fb.asp?m=5362281

Scott

Thank you Gentlmen, I also do not have very much electrical experience ( besides putting a few 110 outlets and some circuit breakers) but I can certainly attempt to solder some wires together. I will bring your list to radio shack and let them decipher all that stuff because it looks foriegn to me. I will let you know how I do. Thanks again , Rotten

These also work well, They made a set for my scratch built shrimp boat and I have a set on a park flyer that I fly at night.
http://www.radicalrc.com/category/Lighting-System-267

I have a couple sets of these for my airplanes and have been very satisfied with them. They are the most realistic set I have found.

http://www.scaleflying.com/Scale-LED...ights_c_9.html