Go Back  RCU Forums > RC Airplanes > Tips & Techniques
Servo help Aid >

Servo help Aid

Notices
Tips & Techniques Want to share a tip or special technique you have either in the workshop or at the flying field or race track? Post it right here!

Servo help Aid

Old 07-07-2002, 02:35 AM
  #1  
Senior Member
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2002
Location: Sugar Land, TX
Posts: 439
Likes: 0
Received 0 Likes on 0 Posts
Default Servo help Aid

Look at this idea. Remember how much fun is to install the brass eyelets into the servo grommets. And have you ever had to take a brass eyelet out of the grommet after it has been there for a while. Like when you damage a servo case in a crash and need to install a new case.
Slide the eyelet onto the small end of this device and insert the eyelets into the bottom of the grommet very easy on the thumbs.
Need to remove the eyelet. Just push on the eyelet from the top and this device will push it out.
And it you don't have the servo drill template install the servo into the servo tray and push through the evelet with the pointed end of the device and now you have a punch mark for the drill to follow.
Lee
[email protected]
Attached Thumbnails Click image for larger version

Name:	16879_5670.jpg
Views:	10
Size:	33.4 KB
ID:	10790  
Old 07-15-2002, 08:04 PM
  #2  
My Feedback: (6)
 
PHILLCO's Avatar
 
Join Date: Mar 2002
Location: SANFORD, FL
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default Servo help Aid

GREAT IDEA. ITS BETTER THEN USING A PHILLIPS SCREWDRIVER. SINCE YOU SENT A PICTURE I CAN MAKE ONE OF MY OWN. THANKS FOR THE TIP.
Old 07-15-2002, 09:14 PM
  #3  
Senior Member
Thread Starter
My Feedback: (2)
 
Join Date: Mar 2002
Location: Sugar Land, TX
Posts: 439
Likes: 0
Received 0 Likes on 0 Posts
Default Servo Help Aid

Phillco
Glad to be of assistance. The larger machined diameter is .150" and the smaller diameter is .095" for Fautabia and .120" for JR.
Sharpening the small end and make a punch for drilling servo screw hole.
Happy Machining.
Lee

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Thread Tools
Search this Thread

Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.