Go Back  RCU Forums > RC Airplanes > Tips & Techniques
Recovering My Old  Fun Scale Stang >

Recovering My Old Fun Scale Stang

Notices
Tips & Techniques Want to share a tip or special technique you have either in the workshop or at the flying field or race track? Post it right here!

Recovering My Old Fun Scale Stang

Old 09-19-2002, 01:59 AM
  #1  
Thread Starter
 
Join Date: Sep 2002
Location: Garden Grove, CA
Posts: 308
Likes: 0
Received 2 Likes on 2 Posts
Default Recovering My Old Fun Scale Stang

Stripped off old yellow monokote with help of heat gun and scaped gummy residue with dull X-Acto as much as possible. Removed remaining gook with fine steel wool moistened with Acetone.(Do it outside). Sucked remaining oil out of fuselage with
Texize K2R spot lifter.( Found a cache of K2R at a discount store, can be hard to find) Apply to greasy balsa, it foams up into a white powder that absorbs grease. (Let it sit and absorb oil)Takes multiple applications where there is a lot of deeply soaked in oil. Coat wood with Balsarite then apply new film covering. Seal covering with Polyuretahane varnish. This time I'm covering with chrome monokote, dulled with a green Scotchbrite pad.

This is the second recovering of this 15 year old .40 size Mustang

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Thread Tools
Search this Thread

Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.