Evolution power system tuning
#1
Thread Starter
Senior Member
Joined: Dec 2005
Posts: 1,166
Likes: 0
Received 0 Likes
on
0 Posts
From: Nashville,
NC
I just wanted to post this in case others are having the same problems
I had with mine this has worked on two engines so far
We were having peoblems keeping the engine running at low speed
and landings were dead stick more then running
the fix was a hotter plug I use the Enya #3 with cool power 15% and it was like night and day
right from the first start up with the new plug I could hear the engine wake up
and now it's a real runner this motors make good power.
Good luck
Ed
I had with mine this has worked on two engines so far
We were having peoblems keeping the engine running at low speed
and landings were dead stick more then running
the fix was a hotter plug I use the Enya #3 with cool power 15% and it was like night and day
right from the first start up with the new plug I could hear the engine wake up
and now it's a real runner this motors make good power.
Good luck
Ed
#2
Senior Member
My Feedback: (1)
Joined: Jun 2005
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
From: Antelope Valley,
CA
This is very true. I have an Evo 1.00 NX and the plug that came with the engine is garbage. Replaced it with an OS medium and it turns into a completely different engine.



