RCU Forums - smoke systems

RCU Forums (https://www.rcuniverse.com/forum/)

- Tips & Techniques (https://www.rcuniverse.com/forum/tips-techniques-180/)

- - smoke systems (https://www.rcuniverse.com/forum/tips-techniques-180/10163924-smoke-systems.html)

rye	11-28-2010 12:42 AM

smoke systems

hi i am using the tmc smoke system on a dle-20 where and what size nipple do i drill and tap for thanks

scale only 4 me

11-28-2010 07:17 AM

RE: smoke systems

You just want to match it up to the tubing you'll be using, tower recommends this one with that pump
http://www3.towerhobbies.com/cgi-bin...?&I=LXD623&P=M

Tip
If the line melts off being the nipple is too short/close to muffler, solder on a 1" length of brass tubing to the nipple, that help disperse the heat and the tubing doesn't have to be right up tight to the muffler.

good luck

rye	11-28-2010 09:36 AM

RE: smoke systems

thank you ,lol i have every size but the 8/32 my luck [:@]

scale only 4 me

11-30-2010 10:00 AM

RE: smoke systems

use the 10/32, it would work ok I'm sure

All times are GMT -8. The time now is 09:10 PM.