RCU Forums - 160 FX Bearing Removal

RCU Forums (https://www.rcuniverse.com/forum/)

- Tips & Techniques (https://www.rcuniverse.com/forum/tips-techniques-180/)

- - 160 FX Bearing Removal (https://www.rcuniverse.com/forum/tips-techniques-180/4361377-160-fx-bearing-removal.html)

Chopper9

06-06-2006 08:06 PM

160 FX Bearing Removal

Was is the easiest way to remove a main crankshaft bearing from the crank case on a 160FX. I'ver heard heat it up in ther oven. If this is true, how long and how hot. Chopper

RCKen

06-06-2006 08:29 PM

RE: 160 FX Bearing Removal

Try this page

[link]http://www.raptortechnique.com/enginebearing.htm[/link]

While they are talking about a 50 SX, the techniques are going to be the same for your motor.

Hope this helps

Ken

jonlowe

06-06-2006 09:01 PM

RE: 160 FX Bearing Removal

Try here. Specific to the OS 1.60.

http://www.rcaerobats.net/BearingChanging.htm

Jon

Quote:

ORIGINAL: Chopper9

Was is the easiest way to remove a main crankshaft bearing from the crank case on a 160FX. I'ver heard heat it up in ther oven. If this is true, how long and how hot. Chopper

All times are GMT -8. The time now is 01:44 PM.