RCU Forums - servo mount bushing

RCU Forums (https://www.rcuniverse.com/forum/)

- Tips & Techniques (https://www.rcuniverse.com/forum/tips-techniques-180/)

- - servo mount bushing (https://www.rcuniverse.com/forum/tips-techniques-180/5655666-servo-mount-bushing.html)

iraqvet

04-02-2007 07:10 PM

servo mount bushing

1 Attachment(s)

I saw a tip on using an awl to insert servo bushings in the rubber grommets but found my Craftsman quick release drill bits work well and hold several bushings making the job quick and easy! Slip the bushings on the bit an push them into the grommets...also work with a jewelers screwdriver...

RRW_SOAR

04-03-2007 10:44 AM

RE: servo mount bushing

Very nice tip, thank you for your help.

Kaos Rulz

04-04-2007 06:48 AM

RE: servo mount bushing

The simple ideas are great ideas. I just wish I had thought of it, especially when I have a couple of sets of these drill bits within reach as I fumble with inserting the grommets using the old-fashioned thumbing method. [:@]
Thanks iraqvet.

tailskid

04-04-2007 09:43 PM

RE: servo mount bushing

Thanks for the tip! Sometimes I think the OD of the eyelet is larger than the hole in the grommet!

Ugo Ferrari

04-17-2007 06:43 PM

RE: servo mount bushing

1 Attachment(s)

Geeze. Fellows... Just use a PENCIL ! Keep it SIMPLE !
Ugo

MinnFlyer

04-17-2007 07:13 PM

RE: servo mount bushing

I use a jeweler's screwdriver

All times are GMT -8. The time now is 04:03 AM.