Applying NO-Stick Decals
 

Can anyone recommend a good way to apply decals that dont have the sticky glue thats usually on decals that modelers use ? Is there a way to put glue on the backside before I apply them in the regular way ?

Thanks,
John

Applying NO-Stick Decals
 

3M spray adhesive

Applying NO-Stick Decals
 

Ditto the 3M what is it ..the triple 7 adhesive...or is it 7?

Spray a light coat or two (Dusting) and let it completely dry before putting it on.
Then iron it down w/ warm heat...monocoat iron is fine..just low temp will activate the adhesive giving you a nice job when through.

Applying NO-Stick Decals
 

Mike,
I don't understand the question.

Applying NO-Stick Decals
 

The lable has a particular name... I'll go and get the can
OK, here it is 3M Super 77 spray adhesive

Thanks !
 

Cool ! Thanks y'all !

So your saying that I should iron them down rather than just use soapy water or windex and squeegee them down ??


- John

Applying NO-Stick Decals
 

John : Are you talking about the ones that you put in water & slide on ?>>>>>>>>>>>>big max 1935>>>>>>>>>>>>>>

Applying NO-Stick Decals
 

He is talking about the car window cling decals...the kind w/no adhesive