JR 9303
 

i currently own a jr 9303 , it has been a good choice of radio imo . but these scan select receivers are a pita , i`d say about 50% of the receivers i`ve purchased thus far have been faulty they will not lock on . does any one else have this problem ? or is this just my luck ? i am almost ready to purchase a futaba .[:@]

RE: JR 9303
 

I have currently or have used dozens of the ScanSelect rxs. Never had a single glitch yet. I could certainly see one bad receiver but I wonder if you may have an intermittent problem with tx output? Have you contacted Customer Support about this? I would be interested to find out what the problem is myself.

Sean

RE: JR 9303
 

I agree, a bad receiver once in a blue moon Ican see. But 1/2 of them being bad ??? Ithink something else is at play here. JR is a reputable company and would not let 50% of anything go out the door while in bad shape.

Bob

RE: JR 9303
 

are we talking about 2.4, the JR X9303?

If so I have bound 15 or more and not a problem. I have unbound a couple by mistake.I have even bound some for other members of our club without a problem.

sticks

RE: JR 9303
 

What does "unbound" and "bound" mean exactly?

I just purchased the 2.4 9303 and the 2.4 DX7.

Charles

RE: JR 9303
 

I'm on board with the rest, magnum. I currently have 13 (790's-UL and standard-, 2000's and 2100's) installed and have yet to ever have an issue with a single one. I am also flying a 9303, and don't plan on switching to 2.4 unless it is mandated for whatever reason. I love the freedom the rx's and the 9303 offer.

I'd contact Horizon and see if they can help.

RE: JR 9303
 

</p>

</p>

I have one of the 9303 on 2.4 and have used JR since the late 70's with NO problems when using JR Recivers. You don't say wether they are JR or some other brand, I have had a lot of problems with NON JR recivers with JR transmitters. You may have a problem with the Transmitter or you may not be setting them up correctly.</p>

</p>

Cheers</p>