RCU Forums - Thin CA vs Medium CA

RCU Forums (https://www.rcuniverse.com/forum/)

- Tips & Techniques (https://www.rcuniverse.com/forum/tips-techniques-180/)

- - Thin CA vs Medium CA (https://www.rcuniverse.com/forum/tips-techniques-180/894935-thin-ca-vs-medium-ca.html)

troyp

06-24-2003 10:02 PM

Thin CA vs Medium CA

I have just brought some thin CA instead of medium CA and was wondering if this will still be okay to use for Spad building?

Thanks,

Troy.

splais

06-25-2003 02:09 AM

Thin CA vs Medium CA

The thickness of the ca is primarily based on the tightness of fit (gap) in the surfaces being glued OR the working time you need, which is only a few seconds with ca.

the thin ca will penetrate and glue tighter joints then the medium. If you are gluing two pieces together and can hold them in place for 30 seconds medium is fine

*Crash*Johnson*

06-25-2003 01:01 PM

Thin CA vs Medium CA

Doesn't the thickness of the CA also determine how fast it cures?

3D_FLYER-RCU

07-05-2003 09:36 AM

Thin CA vs Medium CA

yes medium and thick take longer to cure but i think easyer to use as thier not as runnuy
just my 0.02c
later michael

All times are GMT -8. The time now is 04:10 AM.