RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   TJT Turbine Direct Support (https://www.rcuniverse.com/forum/tjt-turbine-direct-support-203/)
-   -   TJT 3000 parts.. (https://www.rcuniverse.com/forum/tjt-turbine-direct-support-203/4918444-tjt-3000-parts.html)

Falcon 64 10-26-2006 04:33 PM

TJT 3000 parts..
 
Hi all.
I need a new starter included the three legs, and the front wich the starter is mounted on.
How and where can I obtain this items FAST? Prize?

Wayne22 10-28-2006 12:26 AM

RE: TJT 3000 parts..
 
Try to email or PM Marty directly:

http://www.rcuniverse.com/community/...=1&memid=25521

JET FX 10-28-2006 06:40 AM

RE: TJT 3000 parts..
 


ORIGINAL: H?k

Hi all.
I need a new starter included the three legs, and the front wich the starter is mounted on.
How and where can I obtain this items FAST? Prize?
Hi H?k Nony is on the money, ( thanks Wayne)....
Its best to try and email me directly when possible for quick service info anyway.
H?k I tried to PM you some info but appears your RCU PM service is inactive. We need to establish which version your 3000 is and exactly which parts need repair/service. If you could please send me via PM your contact details I can correspond options and repair suggestions if need be also.

Falcon 64 10-28-2006 10:29 AM

RE: TJT 3000 parts..
 
A complete starter with housing, bendix and motor. The three legs wich is screwed on to it, and the compressor housing.
The engine is 5 years old, but don`t know wich version it is.. Is there several versions of it?..
I will do all the exchange of parts myselves, no problem.

The status for my PM box should be oK, but I`ll ask a moderator or the webmaster about it.

What prize can I expect?

Gudmund

JET FX 11-08-2006 07:01 PM

RE: TJT 3000 parts..
 


ORIGINAL: H?k

A complete starter with housing, bendix and motor. The three legs wich is screwed on to it, and the compressor housing.
The engine is 5 years old, but don`t know wich version it is.. Is there several versions of it?..
I will do all the exchange of parts myselves, no problem.

The status for my PM box should be oK, but I`ll ask a moderator or the webmaster about it.

What prize can I expect?

Gudmund
Gudmund sent you new service/parts info via email..... re- prize how about a bag of beer flavoured marshmallows for tailpipe toasting
:D

scraper 12-15-2006 02:10 AM

RE: TJT 3000 parts..
 
Gudmund

Did u ever receive the bits u required?

Mustang51 10-01-2012 05:58 PM

RE: TJT 3000 parts..
 
Hi guys, My 3000 took a crap. I need a new combustion can, fuel manifold, Complete shaft tunnel with mounting flange for the egv. Can anyone help?
Thanks,
Dave

Heliguychris 04-18-2016 04:14 AM

Super old thread i know, anyone know of any parts around for these, im looking for a shaft and rear wheel.

Many thanks,

Kelly W 04-20-2016 10:00 PM

The later versions of the TJT 3000 used a 66mm turbine wheel from Dieter Albisser. Its a very good quality casting, and you can purchase pre-machined...

Go here: http://www.jetmax.ch/turbinenraeder.htm

For the shaft, hard to say... Know a good machinist?

Kelly


All times are GMT -8. The time now is 05:47 PM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.