RCU Forums - 1/14 RC Car Rebuild

Hey guys i got a 1:14 Scale 350z had it for some time, like about 4-5 years and it still works awesome! however i decided to kinda rebuild it.

Here are some pics of the Lights I installed:

http://pwimage.org/images/ght5hfa1drlsozzfuwhw.jpg

http://pwimage.org/images/wzzt6sz6va0b8btozb3z.jpg

http://pwimage.org/images/kbxlhom175tdk22unrq8.jpg

I used:

Two Blue LED Lights

1 Toggle Switch

9V Battery

Battery Connector

High Temp Red Silicon

BTW anyone knows where i can get a 40mhz controller since the steering on the controller has like a metal thing in it that rubs on a metal surface which enables it to turn left and right, sadly the the metal thing in the controller has started cutting into the metal surface any help would be appreciated.

More Mods to come!

Now with lights on:

http://pwimage.org/images/8e7vql0rpa3z53sw907.jpg

will be getting new parts soon i have to clean out the gearbox after all that dust and stuff got in and is giving the motor a hard time to turn the gears

http://pwimage.org/images/z1mufqqdeupit1bn2ix.jpg

I found a 1/14 RC car motor idk if it will work up with my car, for some reason they had no description on it

http://pwimage.org/images/fvz2pn5kdj943ei1xl3v.jpg

Found A Pair of Front Racing Tires

http://pwimage.org/images/icfiyarzuh7kcl3euo8n.jpg

Pair Of Rear Racing Tires Also

http://pwimage.org/images/5kz61izpbu88bqn342pm.jpg

My tires got old, they seemed to have gotten a bit stretched out and the rims begin to slip inside it.

Found a cooling fan also:

http://pwimage.org/images/rsnbdngjarnqbpde3t4.jpg

Found the Racing motor

http://pwimage.org/images/u3y9ddzrfm8vkcyo0a.jpg

I Also need help with the transmitter

This is what it looks like:
http://www.snuffledopple.com/remote-contro...de44c15b593e384

It seems almost impossible to fix, i wish i could continue using it but sadly the steering and throttle has begun to stick when ever it is turned or pulled

Quote:

BTW anyone knows where i can get a 40mhz controller since the steering on the controller has like a metal thing in it that rubs on a metal surface which enables it to turn left and right, sadly the the metal thing in the controller has started cutting into the metal surface any help would be appreciated.

Anyone have any ideas of what i can do to overcome this problem, i cant even find a 40mhz transmitter online.

And about the motor anyone knows if 380 size motors work with 1/14 rc cars, i mean the name of it is a 1/14 motor but im not sure if it will fit in my car since the motor is in an enclosed area as u can see in the pictures provided above

BTW will this motor work ?

http://pwimage.org/images/44gf1es990sf9sh09v2m.jpg

It's a 370 Motor 8T

These are some pics of when i disassembled the car, i was looking for the receiver just in case i have to change it if i were to get a new Radio but sadly its built in on the circuit.

http://pwimage.org/images/btzl24403vscpu92wqbr.jpg

The Servo:

http://pwimage.org/images/s5npj0kizqhroi13usng.jpg

http://pwimage.org/images/9y2qlb43hoawvaiobke.jpg

In case images are too big these are original links:

http://pwimage.org/images/btzl24403vscpu92wqbr.jpg"]http://pwimage.org/images/btzl24403vscpu92wqbr.jpg

http://pwimage.org/images/s5npj0kizqhroi13usng.jpg"]http://pwimage.org/images/s5npj0kizqhroi13usng.jpg

http://pwimage.org/images/9y2qlb43hoawvaiobke.jpg"]http://pwimage.org/images/9y2qlb43hoawvaiobke.jpg]