Ofna .26 Picco Max into a Revo 3.3
 

Hello

http://www2.towerhobbies.com/cgi-bin...7&I=LXKHF0&P=K

I am going to be putting a Picco .26 in a Revo 3.3 and was wondering;

What engine mount works well in the 3.3? and is this satisfactory?
http://www2.towerhobbies.com/cgi-bin...7&I=LXKHF4&P=K

Tower says, but is it really okay, to run the same clutch(16t), same exhasut, and the resonator?

Can I run Top Fuel 20%? If not, what fuel should I use / are people using?

Are these good plugs? http://www2.towerhobbies.com/cgi-bin...?&I=LXCB29&P=V
What other plugs work well?

What clutch bell spur combo are people running? I would like to be able to wheelie but not constantly.

Can I run the 3.3 air filter neck with a Motor Saver on it?

Any other info would be greatly appreciated. Please provide links to suggested items.

Thanks

RE: Ofna .26 Picco Max into a Revo 3.3
 

1.) That is a great motor.
2.) The mount will work just fine, its what i use with no problems.
3.) Yes, all the traxxas stock parts bolt right up.
4.)20% will be fine, I run 30% in mine.
5.) I would run an OS#8 but try and see.
6.) With this motor you will want to run 36/17 to help calm down the wheelies, plus the picco has no problem pulling this combo.
7.) Yes, you can use the stock neck with a MS air filrer, reguires a little modding. I run a HPI Savage air filter on mine with no modding at all.
http://www2.towerhobbies.com/cgi-bin...?&I=LXJSS8&P=7

RE: Ofna .26 Picco Max into a Revo 3.3
 

Search for the Dark Side thread, its the official Picco owners thread around here, though l3asher has covered everything.

RE: Ofna .26 Picco Max into a Revo 3.3
 

Thanks I3asher,

What "modding" must be done to the stock AF neck?

RE: Ofna .26 Picco Max into a Revo 3.3
 

Here's the "How To" with the MS air filter and stock neck. If it was me I would use either the HPI or RB 1/8 buggy filter. Something about having to make the air filter fit just does not sit well with me, but to each his own.

http://www.misbehavin-rc.com/pit-lan...air-filter.asp

RE: Ofna .26 Picco Max into a Revo 3.3
 

Basher gave some good advice but...


These are not the correct plugs for this engine, you need LONG NECK glowplugs.

I like the TRAXXAS plugs.

RE: Ofna .26 Picco Max into a Revo 3.3
 

When you say not correct,
Does that mean, for the fuel I am running or for the engine. What is the negative of using them?.

Are these what you mean?
http://www2.towerhobbies.com/cgi-bin...7&I=LXCB27&P=K

I3basher, I already had that done. I thought you meant I had to modify the neck so it would fit by the spur. Should be good to go already then.