|
OV-10 Bronco 81"
ok ok , I get it , I make some pics of the plane and put it in the forum . bye :D
|
OV-10 Bronco 81"
1 Attachment(s)
there is one
|
OV-10 Bronco 81"
1 Attachment(s)
an other
|
OV-10 Bronco 81"
1 Attachment(s)
other
|
OV-10 Bronco 81"
1 Attachment(s)
these cowls was replaced with an newer one and ligther
|
OV-10 Bronco 81"
1 Attachment(s)
three
|
OV-10 Bronco 81"
1 Attachment(s)
other from 3
|
OV-10 Bronco 81"
1 Attachment(s)
other
|
OV-10 Bronco 81"
1 Attachment(s)
other ;)
|
OV-10 Bronco 81"
1 Attachment(s)
The plans I have buy't from don palmers , they claim to be full scale, I have some problems to build it, in special with the central cabine , it looks there is not totally aliened all the strings , , perhaps I'm not a good scratch builder. I preferred that the plane are made in cad file , there are very pres, and have the option to put layer over layer and probe the alignment. Sorry for my English.
|
OV-10 Bronco 81"
Wow ..that is a good looking airplane and looks like you are doing great.
Thanks for the pics. Good Luck |
OV-10 Bronco 81"
1 Attachment(s)
some body can give an idea of what kind of retracts I can put in these bronco?? its weigth ~ 20 lbs (i hope so :rolleyes: ) only the retracts, the struts (scale ) are to expensive on these stage.thank U :) :sunsmiley the pic I found in the web , these a very good interior.I hope some day a can make like these. :p
|
Re: Palmer's Bronco
1 Attachment(s)
Originally posted by Teachu2 I ordered the plans - and gladly ate the restocking fee when I returned them. Palmer is the only guy I know who sells plans that haven't been prototyped yet. In other words, I paid a high price for plans to a plane that had not been flown. At the time, cowls were just being released by Stan's, and the canopy was just a dream of Palmer's. I think it's probably all available now, but don't know if it's ever been flown. I'd be much more interested in Ed Clayman's fiberglass set - booms and pod, foam wing. |
OV-10 Bronco 81"
1 Attachment(s)
and another of the fiber parts
|
OV-10 Bronco 81"
El Ladrillo, That's quite a kit! Your doing a beautiful job!I'm impressed, Can't wait to see the finished product!
|
OV-10 Bronco 81"
fili :belive , me tooooooooo/ jejejjejejej :D :D
|
Bellcranks?!?!
Guys, the plans call out for 4 60 degree bellcranks (2 on each of the booms for the elevator) but I'm having trouble finding some. I did find some at Nelson Aircraft, but at $20 each, there's got to be a cheaper way!! Where are you getting yours?
Thanks, Dean. |
OV-10 Bronco 81"
My Dad made some out of aluminum flat stock. A hacksaw, drill, and a file is all that is needed....
|
OV-10 Bronco 81"
I used nyrod and a cut 6 point servo arm
|
OV10 BRONCO struts
Hi,
Can anybody shed any light from were one can get the retracts/struts for the Palmer OV10? Any help would be most welcomed. Thanks Regards Reuben |
OV10 Bronco struts
After having pressed the button I realised that RC Crafters could be the only ones that do them however I was unable to locate their website at all. any more manufacturers that do these retracts for this plane at those sizes?
Regards Reuben |
OV-10 Bronco 81"
1 Attachment(s)
F86 sabre: likes line (electric retractable gear, have something). century jet ,sierraprecision , http://sierraprecision.com/prod16.html some pic that I found in the web (I thing is the likes lines) In the past I try to see the gear in the web (from craftmans) , i'm not sure if I have the url , i must seek it in other computer, if I hav't I'll happy to give U ,
|
OV-10 bronco
Built the Uravitch bronco...had to add about 2 lbs. lead to balance. How about you? Have not flown yet..2- OS 61 fx for power.
|
OV10
Hi,
Thanks for the info El Ladrillo....much appreciated. Regards Reuben |
OV-10 Bronco 81"
1 Attachment(s)
hi guys : here is a pic of the boom .
|
| All times are GMT -8. The time now is 12:28 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.