Modeltech Magic 3D
 

I purchased a ModelTech Magi 3D from my favorite hobby shop 3 months ago. The plane comes 90% prebuilt and covered. It took me about 3 hours to have it ready to fly out of the box. I powered it with an os 46 fx and a 12x4 zinger prop.
The first flight was on a very windy day but I wasn,t bothered by it, since I didnt have alot of time and money in it. I flipped the prop and the engine started right up...after being broken in ofcourse. took the plae to the run-way and eased the throt. to her and up she went. A little trim on the elevator was all it needed and it was time to cut loose. I quickly realized this plane will do anything but knife edge. (not enough fuse body).
I have now put about 4 gallons thru it now and can succesfully do tail touches with it. You can do inverted flat spins almost all the way to the ground. No bad habits recovering. the plane is limited only to the pilots abillity. So becarefull!!! Even though you can hover this plane for as long as you want to, It still takes PRACTICE.....
Get one and have a blast. You can do what the big boys do at a fraction of the cost...

Shane