need input about the Walkera Dragonfly 36
is the walketa 36 a good step up from the e-sky honey bee cp2 3D heli.i like my honey bee but the tail motor is really starting to pi$$ me of lol.ill have the walkera 36 sometime next week so what all will i need to do to it?what kind of problems do you guys have with them,if there is any?im getting a blade 400 in a few weeks but i traded a guy on here a rc 18mt for the walkera 36 cause i really dont play with it much and thought it would be a good ideal to fly the walkera be-4 my new blade 400 but i want to know what kind of problems you guys have with it like:: week servos,gyro ect.keep in mind that im new to the heli world so when i hover it 2-3 feet off the ground its a rush lol,so im not trying to do anything crazzy...
|
RE: need input about the Walkera Dragonfly 36
1 Attachment(s)
heres a pic of it
|
RE: need input about the Walkera Dragonfly 36
Looks good,
You will find that it's grossly underpowered with the brushed motor and stock battery. Probably will barely hover, But at least it is adjusted and setup as they are not from the factory. Add a brushless motor and a 1800mah or bigger lipo and it will be a good flyer. You will be amazed by how much more stable it is over your cp2 and tail motors are the DEVIL.[:@] |
RE: need input about the Walkera Dragonfly 36
i have the standard 36 and as above says its very underpowered. ive got a bushless ordered already..
|
RE: need input about the Walkera Dragonfly 36
ORIGINAL: babyhuey Looks good, You will find that it's grossly underpowered with the brushed motor and stock battery. Probably will barely hover, But at least it is adjusted and setup as they are not from the factory. Add a brushless motor and a 1800mah or bigger lipo and it will be a good flyer. You will be amazed by how much more stable it is over your cp2 and tail motors are the DEVIL.[:@] |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: jez33 i have the standard 36 and as above says its very underpowered. ive got a bushless ordered already.. |
RE: need input about the Walkera Dragonfly 36
You need to match the battery to the motor. If you get a brushless make sure that you get a big enough battery also.
The stock motor will be helped by going to a lipo also but the esc built into the receiver on those are famous for burning up! So watch your butt! |
RE: need input about the Walkera Dragonfly 36
You should get a 3000 kv brushless motor and a 12t pinion. I use my JGF 400DF and CC35 esc, have about 400 flights on the motor and it's like new. The 2.3mm shaft 400DF allows you to use Revco pinions, a lifetime gear. You will need a castle 25 or 35 with the 400DF unless you can find a cheaper esc that will soft start it.
A cheaper heavier combo will be an Align 430L 3150 and BL-35G esc. The 35G esc has a good BEC for 4 servos. Use an 11T pinion with the 430L 3150. A 430L 3550 will be too fast for the 36, in my opinion. Don't go over 2500 head speed on the plastic head. And since you are getting a DX6i, get an AR6000 for the 36. Don't use the stock radio. Probability is high that it will lock up and cause a dangerous condition. You are warned. CH |
RE: need input about the Walkera Dragonfly 36
ive been using a 2200 mah lipo and its either 20c or 25c continuous..
even as standard i think the power is usless even to learn on,, it hovers but i would forget forward med to fast flight as my just hasnt got enough power.. im getting a bushless motor and speedcontroller which sould do the trick.. im wondering though regarding the standard settup if its the standard speedcontroller that lets it down. i am going to try a 30 mah speedcontroller to see if it improoves the standard setup a little before i change the whole settup to bushless |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: Chophop You should get a 3000 kv brushless motor and a 12t pinion. I use my JGF 400DF and CC35 esc, have about 400 flights on the motor and it's like new. The 2.3mm shaft 400DF allows you to use Revco pinions, a lifetime gear. You will need a castle 25 or 35 with the 400DF unless you can find a cheaper esc that will soft start it. A cheaper heavier combo will be an Align 430L 3150 and BL-35G esc. The 35G esc has a good BEC for 4 servos. Use an 11T pinion with the 430L 3150. A 430L 3550 will be too fast for the 36, in my opinion. Don't go over 2500 head speed on the plastic head. And since you are getting a DX6i, get an AR6000 for the 36. Don't use the stock radio. Probability is high that it will lock up and cause a dangerous condition. You are warned. CH |
RE: need input about the Walkera Dragonfly 36
can someone send me there e-mail address so i can send them a few link to some of the brushless set ups i found on e-bay.i just want to know what you guys think about them?the whole set up's are new from hong kong(everything comes from there anyways lol) and there around $30.00 to $40.00 dollars shipped..
|
RE: need input about the Walkera Dragonfly 36
TB,
If you looking at $75 I think the 430L 3150 and BL-35G would be the best quality. You might get a cheaper buy but have to buy a new one for more $ a short time later. You can get the two for close to the $75. Probably $85, but shop around. Here is a bit of well meant advice, your forum name might not go so well with a lot of the readers here and they may be uncooperative. When I first started I thought it was a bunch of military people and adults that were rough and cussy. Turns out I was wrong. It's a family place here and other heli forums, so please don't take offense but advice. I know :D . And I am a better person now. Oh, once and awhile I slip back and get a little crude, then get low response. There's a new world order in fast growth. CH |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: Chophop TB, If you looking at $75 I think the 430L 3150 and BL-35G would be the best quality. You might get a cheaper buy but have to buy a new one for more $ a short time later. You can get the two for close to the $75. Probably $85, but shop around. Here is a bit of well meant advice, your forum name might not go so well with a lot of the readers here and they may be uncooperative. When I first started I thought it was a bunch of military people and adults that were rough and cussy. Turns out I was wrong. It's a family place here and other heli forums, so please don't take offense but advice. I know :D . And I am a better person now. Oh, once and awhile I slip back and get a little crude, then get low response. There's a new world order in fast growth. CH |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: Chophop TB, If you looking at $75 I think the 430L 3150 and BL-35G would be the best quality. You might get a cheaper buy but have to buy a new one for more $ a short time later. You can get the two for close to the $75. Probably $85, but shop around. Here is a bit of well meant advice, your forum name might not go so well with a lot of the readers here and they may be uncooperative. When I first started I thought it was a bunch of military people and adults that were rough and cussy. Turns out I was wrong. It's a family place here and other heli forums, so please don't take offense but advice. I know :D . And I am a better person now. Oh, once and awhile I slip back and get a little crude, then get low response. There's a new world order in fast growth. CH |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: Chophop TB, If you looking at $75 I think the 430L 3150 and BL-35G would be the best quality. You might get a cheaper buy but have to buy a new one for more $ a short time later. You can get the two for close to the $75. Probably $85, but shop around. Here is a bit of well meant advice, your forum name might not go so well with a lot of the readers here and they may be uncooperative. When I first started I thought it was a bunch of military people and adults that were rough and cussy. Turns out I was wrong. It's a family place here and other heli forums, so please don't take offense but advice. I know :D . And I am a better person now. Oh, once and awhile I slip back and get a little crude, then get low response. There's a new world order in fast growth. CH |
RE: need input about the Walkera Dragonfly 36
ORIGINAL: Chophop since you are getting a DX6i, get an AR6000 for the 36. Don't use the stock radio. Probability is high that it will lock up and cause a dangerous condition. You are warned. CH |
RE: need input about the Walkera Dragonfly 36
He means that the radio will glitch or lock up but the newer Walkera radios are much better that they used to be in my experiance.
|
All times are GMT -8. The time now is 07:28 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.