Weatronic MUX-Box (SCU Sensor Interface) available
#1
Senior Member
Thread Starter
Join Date: Dec 2011
Location: , GERMANY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Weatronic MUX-Box (SCU Sensor Interface) available
Hi WEA users,
just saw that the long awaited WEA "Mux-Box" (Sensor Multiplexer Box) is available in their shop at:
http://weatronic.e-vendo.de/telemetr...t=40&c=40&p=40
Under "acessories" you will find some type of sensors, but not all of the supported sensors are already available.
The doc is also available from download as .PDF:
http://www.weatronic.com/de/download...-box-anleitung
And there has been added a new doc as an addition to the GPS-Module:
http://www.weatronic.com/de/download...dusumschaltung
Please be sure to use Gigacontrol v2.59 with the MUX-Box. You can get this in the download-section. All up-to-date firmware for the various WEA components is also included in this archive.
best wishes
Thomas
#3
Senior Member
Thread Starter
Join Date: Dec 2011
Location: , GERMANY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
RE: Weatronic MUX-Box (SCU Sensor Interface) available
...removed the ugly copy-paste version, use the PDF in the next post by Teus instead... Have fun.
Tom