sidetrust engine on WH edge V2
 

Hi Dudes,

What is the site and down or uptrust for the engine on the Wild-Hare Edge V2 ??

Regards

Sapca

RE: sidetrust engine on WH edge V2
 

Mount the engine on the firewall with no thrust angle changes. Right thrust is already built in.

TF

RE: sidetrust engine on WH edge V2
 

There's already between 2.5 and 3 degrees of right thrust built into the firewall. I have not noted any up or down thrust. It does not need any. The only time there's any pitch change with power change is when the C/G is much too aft. That will be aft of a 5-1/2 to 5-3/4" C/G. Use the same size standoffs at all the engine mounting locations to avoid changing thrust angles. I think there's already something in the instruction book that covers this.

RE: sidetrust engine on WH edge V2
 

Thx silversurfer,

I only have 1,7 deg right thrust and 0,5 deg downtrust.

I don't have the long engine standoffs for the DA ,so I use shims and that give me the whrong right thrust.

Regards

Sapca