Recommended throws 35% SU26?
 

Hi guys,

what are the recommended surface throws on the 35% SU26 for IMAC and freestyle/3d ?
and is there a link to the full manual (pdf) as I don't have one?

cheers

RE: Recommended throws 35% SU26?
 

Here is a link to the manual

http://www.wildharerc.com/downloads/...-26-detail.pdf

RE: Recommended throws 35% SU26?
 

In the first 10 pages or so of this thread I noted what I used for the prototype. They worked well for 3d but would need to be de-tuned a little for IMAC. Rate switches would take care of that.

RE: Recommended throws 35% SU26?
 

Typically you look at 12-14 degrees for IMAC on aileron and elevator with about 25-35% expo

I like more throw on my Rudder with more expo so I can complete a hammerhead without moving switches.


Best thing is if you have switch rates......put in a small/ medium/ large amount for each surface.

Takeoff and fly a couple of manuevers in small. if its not enough go to meduim on on surface at a time.

Once you land you can reprogram your radio so small is IMAC, medium is for certain manuevers and large is 3-D or max throw