Screamin' Toucan flies!
#51
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
The IMC doesn``t take a lot of torque, and rather than try to have enough travel to go from shut-off to running condition, it might be easier to allow enough travel to flood it out. I`ll see when I get a chance to tinker with the setup on a bench.
#52
If the IMC is the kind that squeezes the tubing, you can use the latex surgical type tubing. That is what we use for the shutoffs. It takes much less effort to squeeze.
#55
These look good so far..... medical grade dont know how long they will last with fuel will cost you 10.96 to find out lol.
2 nipples for fill line and to the tank or bladder. These are small and light enough for the job and can be mounted up close to the NV. Switch or button style can take apart and set up for norm closed or norm open.
Features:
• Metal actuators enhanced robust design
• Ideal for use up to 1/16 Id / 1.58mm
• Plumbing versatility
• Electroless nickel plated for corrosion and wear resistance
• Nut provided for panel mounting
• Precision machined
http://www.pneumadyne.com/micro-valves-p-582-l-en.html
2 nipples for fill line and to the tank or bladder. These are small and light enough for the job and can be mounted up close to the NV. Switch or button style can take apart and set up for norm closed or norm open.
Features:
• Metal actuators enhanced robust design
• Ideal for use up to 1/16 Id / 1.58mm
• Plumbing versatility
• Electroless nickel plated for corrosion and wear resistance
• Nut provided for panel mounting
• Precision machined
http://www.pneumadyne.com/micro-valves-p-582-l-en.html
#56
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
#58
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
Came in 9.6 - 9.7 oz. Pretty happy with that. I've only monkeyed around a bit so far, but I had it sounding like a combat match for 15-20 seconds on the last flight with some low hard circuits. The turning performance is nothing I've ever experienced before. This thing is supposed to whip around turns at 3-4 oz more than that.. it's doesn't seem to have a lot of trouble changing direction quickly at this weight and power loading. But the main comment I have about it, is that all the noise and ruckus aside, this thing is extremely smooth and easy to fly. As soon as I levelled it out after the first launch I thought "nice!" except for the 8-9 clicks of up trim it had in it from my test gliding efforts. Those loops early in the video required no elevator input IIRC.. loop loop loop grab trim loop loop grab trim.. and where is the darn low rate?!! But nothing got too out of hand.
I have triple rates set up on the flight mode switch - it was pretty sensitive after launch. I think low rate is 25% aileron and 40% elevator, wasn't a bad starting point but a bit out of balance, need maybe 1/3 less elevator and a bit less aileron. Medium was plenty for landing and glide aerobatics, IIRC it is at about 65% on both. So if I can it might be prudent to go in a hole on the servo arms if I can and reset all three rates, but if not possible it's not suffering from a lack of torque and response is tight and predictable so far. Ain't no slop except a minuscule click from servo backlash.
I have triple rates set up on the flight mode switch - it was pretty sensitive after launch. I think low rate is 25% aileron and 40% elevator, wasn't a bad starting point but a bit out of balance, need maybe 1/3 less elevator and a bit less aileron. Medium was plenty for landing and glide aerobatics, IIRC it is at about 65% on both. So if I can it might be prudent to go in a hole on the servo arms if I can and reset all three rates, but if not possible it's not suffering from a lack of torque and response is tight and predictable so far. Ain't no slop except a minuscule click from servo backlash.
#59
So not bad if you add the extra servo and shut off still only 10oz ish with fuel your flying at 11oz ish so should still turn on rails.
Yep static glide testing tends to leave you with too much up trim when on the prop.Lol wish I could speak commands to my transmitter such as down elevator trim 3 clicks and such. Sure would save some nervous adjustments on those first crucial seconds on maiden flights. Well I have been working on the Skorch should be able to cover the wing soon I have been draggin arse on the last portion of the setup. CP started his build before the Skorch so Im waiting for his first flight lol thats my excuse. Monday Partly Sunny 77 and light winds arggg.
Yep static glide testing tends to leave you with too much up trim when on the prop.Lol wish I could speak commands to my transmitter such as down elevator trim 3 clicks and such. Sure would save some nervous adjustments on those first crucial seconds on maiden flights. Well I have been working on the Skorch should be able to cover the wing soon I have been draggin arse on the last portion of the setup. CP started his build before the Skorch so Im waiting for his first flight lol thats my excuse. Monday Partly Sunny 77 and light winds arggg.
Last edited by Pond Skipper; 12-14-2014 at 06:19 PM.
#61
Yes something simple, most of us have talking phone systems and gps in our cars it wouldn't be that much to add audible command controls to trims these days.
Down / Up / Left / Right / Flap Up - Down / Throttle Up - Down. that simple.
Mind you this is more helpful with fast planes but most sport flyers could use a little hands free stress too.
Down / Up / Left / Right / Flap Up - Down / Throttle Up - Down. that simple.
Mind you this is more helpful with fast planes but most sport flyers could use a little hands free stress too.
#62
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
Actually in the interest of improving that situation I've been wanting to get a decent transmitter tray and try that out. I have a bit of nerve damage that doesn't bother me on the sticks, but is makes dancing around the Tx while supporting it a bit more of a challenge these days. I blew it, I should have put that on the wife's Xmas list two weeks ago!
#63
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
If either Steve Wilk or APC makes it, it has a real purpose. Even if the application is a bit antiquated.
I couldn't get 4.5 pitch to work when I tried it years ago and so "wrote it off" as not usable for .049 - .061.
If MJD can make it work with what looks like a superior airframe and get into the 150's, then that proves me wrong about "practical limits".
.
I couldn't get 4.5 pitch to work when I tried it years ago and so "wrote it off" as not usable for .049 - .061.
If MJD can make it work with what looks like a superior airframe and get into the 150's, then that proves me wrong about "practical limits".
.
Steve WIlk goes right up to 5" pitch in 1/2A speed props - but I tend to think would be geared towards engines hogtied to lower rpm due to limitations, such as 50 year old design etc. In this case, there is enough hp and low enough drag that we should see the same trend like in the 10cc class - the ability to successfully take advantage of higher P/D ratios than control line due to the lack of line drag. Who knows, this may be the first or some of the first evidence of that on the half-A scale. It has me stoked enough that I really want to get at the next model.
BTW since cracking my nice 4.1x4.5, I realized I have one more, but not as massaged as the last one (easy) and two of the 4.75 pitch. I have one of those trimmed and thinned to 3.9 x 4.75. `With the wing loading this thing has the launches are nothing, so don't care about the static pull. It will still be plenty I am sure. Snow`s almost melted again, might get a last chance to toss it to the wind.
#64
Senior Member
My Feedback: (3)
4.5 is a pretty big leap from 4...!
What would be nifty is to rig up is an industrial squirrel cage blower that can pump 150 mph air at a running engine....then do bench testing over the winter to see what is what with these engines and props.
What would be nifty is to rig up is an industrial squirrel cage blower that can pump 150 mph air at a running engine....then do bench testing over the winter to see what is what with these engines and props.
Last edited by combatpigg; 12-15-2014 at 04:31 PM.
#67
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
This is the one I bought in the fall for starting the 90mm pulsejet. Funny, the exhaust velocity looks about perfect, don't it? And it has speed control.
[TABLE="width: 100%"]
[TR]
[TD="colspan: 3"]
Ryobi RY40402 155 mph 300 CFM 40-Volt Lithium-ion Cordless Jet Fan Blower [/TD]
[/TR]
[TR]
[TD][TABLE="class: img img140"]
[TR]
[TD][TABLE="width: 140"]
[TR]
[TD] [/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[TABLE="width: 100%"]
[TR]
[TD="colspan: 3"]
Ryobi RY40402 155 mph 300 CFM 40-Volt Lithium-ion Cordless Jet Fan Blower [/TD]
[/TR]
[TR]
[TD][TABLE="class: img img140"]
[TR]
[TD][TABLE="width: 140"]
[TR]
[TD] [/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
#71
The engine should be unrestricted if you want real data. The engine could be on a steel tether arrangement to reduce the chance of line break at high speeds. A head wind can be introduced on one side of the circle pattern if desired. The lower arm can be aluminum tube or steel rod such as 3/16th if you want to really reach out in dia the top line is steel heavy gage wire. There would be enough induced drag to simulate more than twice the drag of a plane but still allow the engine to unload very well. You can time the laps you can audio tach the engine you can radar it if desired. A bearing at the top and two in a tube or at least one at the rod.
#72
You may as well fly control line speed. That is pretty much what you described. This video is FAI speed, F2A. About 60 ft. lines, 9 laps equal one KM. The time is worked out from that. www.youtube.com/watch?v=1B6MKywAgjY The lines are pretty thick, and slow you down. They used to be .4mm or .016" when I did it many moons ago. That sounds like about 40,000 rpm?
#73
Yes the idea is just to set up in the back yard say 6ft to 8ft off the center pole... sit in a chair / drink a beer and test props way less fuss and in the end nothing smacks the ground. = )
#75
Thread Starter
My Feedback: (1)
Join Date: May 2003
Location: Orangeville, ON, CANADA
Posts: 8,658
Likes: 0
Received 2 Likes
on
2 Posts
Yeah the top of the line F2A engines can peak out in the 43-44k range. insane sound. I'm looking forward to hearing it myself on the Toucan's big brother, that I will try to get together for the spring:
217 sq in, plus..
I suspect this will be fairly sporty.
217 sq in, plus..
I suspect this will be fairly sporty.
Last edited by MJD; 12-16-2014 at 07:44 AM.