Teenie-tiny outrunners
#1
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Salinas,
CA
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Teenie-tiny outrunners
I am building an indoor model with my son. It is an Aerocraft Ltd Playboy cabin 200. The all up weight of this airplane is 4.7 ounces and 200 sq inches of wing area. Plans call for a, 5-gram outrunner, 4 amp bec, GWS 5x3, and 2S lipo". Trouble is that the usual vendors don't have such a tiny motor in the required 2000 KEV range. The Park 180 is close but expensive. Any ideas on where to get something like this with a prop driver?
#2
RE: Teenie-tiny outrunners
Can you go with a geared setup?
http://www.hobbypartz.com/88e-gps002-c05m-8500kv.html
This one has a higher KV?
http://www.hobbypartz.com/88e-mm101-...or-2900kv.html
Buzz.
http://www.hobbypartz.com/88e-gps002-c05m-8500kv.html
This one has a higher KV?
http://www.hobbypartz.com/88e-mm101-...or-2900kv.html
Buzz.
#3
My Feedback: (30)
Join Date: Oct 2007
Location: Mount Juliet,
TN
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
RE: Teenie-tiny outrunners
This setup should be what you need:
hexTronik 5gram Brushless Outrunner 2000kv
http://www.hobbyking.com/hobbyking/s...er_2000kv.html
TURNIGY Plush 6A /.8bec/6g Speed Controller
http://www.hobbyking.com/hobbyking/s...ontroller.html
Turnigy nano-tech 260mah 2S 35~70C Lipo Pack
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
5X3 Propellers (5Pcs/Bag)
http://www.hobbyking.com/hobbyking/s...5Pcs_Bag_.html
Total ~$25
hexTronik 5gram Brushless Outrunner 2000kv
http://www.hobbyking.com/hobbyking/s...er_2000kv.html
TURNIGY Plush 6A /.8bec/6g Speed Controller
http://www.hobbyking.com/hobbyking/s...ontroller.html
Turnigy nano-tech 260mah 2S 35~70C Lipo Pack
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
5X3 Propellers (5Pcs/Bag)
http://www.hobbyking.com/hobbyking/s...5Pcs_Bag_.html
Total ~$25
#4
Member
Join Date: Dec 2003
Location: nottingham, UNITED KINGDOM
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
#5
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Salinas,
CA
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
RE: Teenie-tiny outrunners
ORIGINAL: rem0.061
This setup should be what you need:
hexTronik 5gram Brushless Outrunner 2000kv
http://www.hobbyking.com/hobbyking/s...er_2000kv.html
TURNIGY Plush 6A /.8bec/6g Speed Controller
http://www.hobbyking.com/hobbyking/s...ontroller.html
Turnigy nano-tech 260mah 2S 35~70C Lipo Pack
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
5X3 Propellers (5Pcs/Bag)
http://www.hobbyking.com/hobbyking/s...5Pcs_Bag_.html
Total ~$25
This setup should be what you need:
hexTronik 5gram Brushless Outrunner 2000kv
http://www.hobbyking.com/hobbyking/s...er_2000kv.html
TURNIGY Plush 6A /.8bec/6g Speed Controller
http://www.hobbyking.com/hobbyking/s...ontroller.html
Turnigy nano-tech 260mah 2S 35~70C Lipo Pack
http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html
5X3 Propellers (5Pcs/Bag)
http://www.hobbyking.com/hobbyking/s...5Pcs_Bag_.html
Total ~$25
I looked at HK but did not find that one. Their site can be overwhelming.
Thanks again,
Scot