Servos for GP ElectroStik
#1
Thread Starter
Join Date: Nov 2002
Location: Buna, TX
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Servos for GP ElectroStik
New to electric GP said to use 30oz servos. Looking at servos the ones that fit the cutouts are only good for about 18 to 20oz. Can anyone tell me what to use?
#2
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servos for GP ElectroStik
These are what is specc'd out? Do they fit? http://www3.towerhobbies.com/cgi-bin...?&I=LXTJJ6&P=Z It just says micro servo?
#3
My Feedback: (314)
Join Date: Feb 2002
Location: Keyport, NJ
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servos for GP ElectroStik
I used HS-82MG servos in my first Electrostik. They worked very well. I have the RXR version now and it has Electrofly Micros in it. They seem to work well.
#5
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servos for GP ElectroStik
ORIGINAL: MrMulligan
I used HS-82MG servos in my first Electrostik. They worked very well. I have the RXR version now and it has Electrofly Micros in it. They seem to work well.
I used HS-82MG servos in my first Electrostik. They worked very well. I have the RXR version now and it has Electrofly Micros in it. They seem to work well.
#6
My Feedback: (314)
Join Date: Feb 2002
Location: Keyport, NJ
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servos for GP ElectroStik
It's one of the nicest flying planes I own. My original was powered with an AXi 2826 on 4 A123 cells. Plenty of power and plenty of flight time. I lost it when the elevator servo went intermittant on me. Just dove for the ground. I bought the RXR version to get back in the air quickly. I love Stiks, I've always had one.