Traxxas Summit
#1303
Senior Member
Join Date: Jul 2010
Location: Tyler TX
Posts: 3,549
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
Lol Maxamps?
ORIGINAL: TheKennyKiller
You know, the ones with C ratings that are about as high as their prices.
ORIGINAL: pyromatic177
What batts are those?
What batts are those?
#1304
Junior Member
Join Date: Oct 2012
Location: vaasa, FINLAND
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
Finally GF went to Ikea to spend probably same amount of money as my Summit But then I had some quality time to drive the truck.
I added some more pictures in my dropbox if you want to have a look. I noticed the tires worked quite well on the rocks but the servos were quite weak. Could it be as the previous owner had left them fighting each other? That was the first thing I corrected when I got the truck. Also I have to change to a new Low voltage alarm. That thing started screaming at 3.8V, I have understood that 3.4V is at least still a safe voltage?
enjoy the pictures even as I forgot to change the lens on the camera so I could not take any wide pictures.
https://www.dropbox.com/sh/m0uhpcz23nuvn39/W1RPnOAf6W
Happy Sunday.. Now it's Pike fishing time! or first bacon and eggs as driving the summit makes me hungry!
#1305
Banned
Join Date: Aug 2007
Location: QLD, , AUSTRALIA
Posts: 1,747
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
ORIGINAL: thehuntingterminator
Lol Maxamps?
Lol Maxamps?
ORIGINAL: TheKennyKiller
You know, the ones with C ratings that are about as high as their prices.
ORIGINAL: pyromatic177
What batts are those?
What batts are those?
#1307
RE: Traxxas Summit
Nice red summit you got there jedirt.
Today I took the summit out for some 5s lipo bashing and crawling. Broken front fender , busted headlights(my son launched it out from a cliff) and stripped one Pivot Ball. But it delivered , all the way.
Video in a couple of hours. Stay tuned folks :-)
Today I took the summit out for some 5s lipo bashing and crawling. Broken front fender , busted headlights(my son launched it out from a cliff) and stripped one Pivot Ball. But it delivered , all the way.
Video in a couple of hours. Stay tuned folks :-)
#1308
RE: Traxxas Summit
Today's fun
[youtube]http://www.youtube.com/watch?v=8udHarcJ230&list=UURNlga8sE0qJBcPb_5FFovQ&index=1&feature=plcp[/youtube]
crawling vers later.
#1311
RE: Traxxas Summit
Crawling .
[youtube]http://www.youtube.com/watch?v=aY2uUP-J5gc&list=UURNlga8sE0qJBcPb_5FFovQ&index=1&feature=plpp_video[/youtube]
damn this car is fun
[youtube]http://www.youtube.com/watch?v=aY2uUP-J5gc&list=UURNlga8sE0qJBcPb_5FFovQ&index=1&feature=plpp_video[/youtube]
damn this car is fun
#1313
RE: Traxxas Summit
No problem on 5s. all the video is from one pack(set)and I have left alot out. so it's great fun. I hook the 2s on the wires with the red label on it(been told that because of the internal BEC) but I have read that that dont' matter either. Anyhow, the light were a ripped wire, front fender will hold up a bit more and the pivot ball is back in place. Problem is, and is what I suspected, many of the bearings are toast, almost hard to turn by hand, seems prev owner had a love for the sand pit...
#1315
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
I just replaced all those also...they lasted 8 months. Cant believe it with all the water i drive in. Here is my losi micros first run today. This thing is alot of fun to be so small. I was going to drive it for a few months then sell it for a profit since i got it so cheap but man i like this thing!!!
http://youtu.be/b5Jd2WyrgOg
#1316
Junior Member
Join Date: Oct 2012
Location: vaasa, FINLAND
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
I also plan to check bearings but first I will drive the truck only cleaning and oiling it up after each run. So wet outside here so it's water all over the places.
I've been thinking on getting a losi micro crawler also. Just haven't found any used ones and new is like 55GBP + 21GBP freight to Finland from UK where I found the cheapest one.
For my 2 Zipppy 5000mha lipos. I think they are in quite bad shape. When I changed to a new low voltage alarm, It starts screaming already after a few minutes if I drive the summit to 110%. But when I check the voltage it is ok. Or could it be that the 20C the batteries have is not enough? For crawling and going in low speed it's working ok.
I've been thinking on getting a losi micro crawler also. Just haven't found any used ones and new is like 55GBP + 21GBP freight to Finland from UK where I found the cheapest one.
For my 2 Zipppy 5000mha lipos. I think they are in quite bad shape. When I changed to a new low voltage alarm, It starts screaming already after a few minutes if I drive the summit to 110%. But when I check the voltage it is ok. Or could it be that the 20C the batteries have is not enough? For crawling and going in low speed it's working ok.
#1317
RE: Traxxas Summit
Not an lipo expert, but maybe one cell is dropping the V below the alarm limit if you bash hard. (if I drive the summit to 110%.) I recon you mean hard driving ? :-) 20c Should be enough for a car, but if they are old and abused then maybe they are not up for the task.
I would say have a look and see if everythink is spinning free. I though mine was but I tell you, those bearings were so grindy one of the axel hardly moved when I spun it with my hand. And i low gear you really don't notice anything wrong since it has the power . have a look at the spur/piniong mesh to. Second hand is second you know .-)
I would say have a look and see if everythink is spinning free. I though mine was but I tell you, those bearings were so grindy one of the axel hardly moved when I spun it with my hand. And i low gear you really don't notice anything wrong since it has the power . have a look at the spur/piniong mesh to. Second hand is second you know .-)
#1318
Junior Member
Join Date: Oct 2012
Location: vaasa, FINLAND
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
The axles feel quite ok, does not take much power to turn around. I will have to check the mesh again.
But my guess is that the lipo is in bad shape. At least one of them take about 2 hours to re-charge & balance at 5A and the Lipo is 5A so it does not feel right. The other Lipo only take a bit over one hour. Now I put in writing on the lipos so I know which one is the slow and normal. Maybe if I put the LVA on the better lipo it will give more accurate rating on when the LVA start screaming
#1319
RE: Traxxas Summit
So anybody care to share some shock fluid tip's.Thinking about getting a couple of bottles this weekend, but not sure what to pick for the summit.
thanks
thanks
#1321
RE: Traxxas Summit
thanks. and while I'm at it, I think I will change some of the BB's aswell
[youtube]http://www.youtube.com/watch?v=EMm8n5wgQIk&list=UURNlga8sE0qJBcPb_5FFovQ&index=1&feature=plpp_video[/youtube]
[youtube]http://www.youtube.com/watch?v=EMm8n5wgQIk&list=UURNlga8sE0qJBcPb_5FFovQ&index=1&feature=plpp_video[/youtube]
#1323
RE: Traxxas Summit
Today, It got new shock oil ,50, and new springs in the back. Changed out the bad bearings, and now it actuallt keeps rolling for a moment after I let go of the throttle :-)
#1324
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Dothan,
AL
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
RE: Traxxas Summit
I love nice new bearings....rides like a caddy Well guys ive got to have some more speed!!!> I want like 10mph more. Not too much. Can i get some suggestions on a BL setup that can still crawl in low gear or maybe a brushed 1 that will do 30mph. Doesnt need to be WP bc if i plan on takin it in water ill just swap back to stock.