TMMY Scale Composites 35% scale Cessna
#1626
Join Date: May 2008
Location: Sydney, AUSTRALIA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
3-4 months! I don't think so.... I ordered in March and I still don't think he has started it. As long as he takes his time on the paint I am in no hurry.
#1627
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: Parrot Girl
3-4 months! I don't think so.... I ordered in March and I still don't think he has started it. As long as he takes his time on the paint I am in no hurry.
3-4 months! I don't think so.... I ordered in March and I still don't think he has started it. As long as he takes his time on the paint I am in no hurry.
#1629
My Feedback: (26)
Join Date: Sep 2005
Location: monterey,
TN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
TSHARK203, Long time no posts. How is everyone doing? Hey can you all tell me how much down elevator mix to put in at half and full flaps? Want to make my maiden as smooth as possible but it still will not be till may before I am ready. Thanks, Steve Mullis
#1630
My Feedback: (206)
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: smullis
TSHARK203, Long time no posts. How is everyone doing? Hey can you all tell me how much down elevator mix to put in at half and full flaps? Want to make my maiden as smooth as possible but it still will not be till may before I am ready. Thanks, Steve Mullis
TSHARK203, Long time no posts. How is everyone doing? Hey can you all tell me how much down elevator mix to put in at half and full flaps? Want to make my maiden as smooth as possible but it still will not be till may before I am ready. Thanks, Steve Mullis
How have you been. Any new pics of your plane. I dont use any mix. No need for it. Not sure about any one else but I am a no mix kind of guy. I just fly it. You dont see any pitch changes when adding the flaps in. Plus mine deploy slowly about 5 sec travel time. To tell you the truth I dont even mix my jets I just use tbe elevator to compensate.
I am about to send my wheels and landing gear off to Marc in the UK to have electric brakes made for her.
George
#1631
My Feedback: (26)
Join Date: Sep 2005
Location: monterey,
TN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
TSHARK203, Thanks George. Your help is sure appreciated. Yea I have been looking for brakes also and they sure are hard to find. Especially elect brakes. How long will it take for them to set up the brakes and what will the cost be?
You can use a PM to tell me. I found something on hobby partz that might work. They are mechanical with with drum brakes. 70mm and there cheap for a pair and look like they will fit the sullivan hub. I checked the LADO site and
they have a nice set but have no release date or the system as of yet, also elect. I checked my bank account today and Aircraft International and Beila has finally charged me for my prop. So I should get it this week sometime.
I will take some photos after I put on the prop so you can see my custom exhaust I made out of my 3W mufflers and some flex hose and some mtw headers. Came out pretty nice right out of the cowl flaps with the curve of the
headers sticking down and out about and inch or so. Yes I have a servo speed adjustment on my transmitter and I can slow down my flaps also which will make a more scale appearance. I am getting more excited about this plane
everytime I work on her.Man I also have been looking for pilots and found one but for $400.00. I am gonna try and find me a HOWDY DOODY and Uncle Bob dolls and put them in there. LOL!!! See Ya, Steve
You can use a PM to tell me. I found something on hobby partz that might work. They are mechanical with with drum brakes. 70mm and there cheap for a pair and look like they will fit the sullivan hub. I checked the LADO site and
they have a nice set but have no release date or the system as of yet, also elect. I checked my bank account today and Aircraft International and Beila has finally charged me for my prop. So I should get it this week sometime.
I will take some photos after I put on the prop so you can see my custom exhaust I made out of my 3W mufflers and some flex hose and some mtw headers. Came out pretty nice right out of the cowl flaps with the curve of the
headers sticking down and out about and inch or so. Yes I have a servo speed adjustment on my transmitter and I can slow down my flaps also which will make a more scale appearance. I am getting more excited about this plane
everytime I work on her.Man I also have been looking for pilots and found one but for $400.00. I am gonna try and find me a HOWDY DOODY and Uncle Bob dolls and put them in there. LOL!!! See Ya, Steve
#1632
Member
Join Date: Feb 2008
Location: Pieta, MALTA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
hi Steve, i have flown my Cessna a couple of times now and i agree with George that you don't need to mix any down trim for take-off or landing flaps position. as regards the brakes, i use the Bertolani air brakes system from Italy. i found them very good, i need them because our clubs air strip has wall at the end of it, so i need to stop it very quickly after landing. i have attached a youtube with one of the flights for you to see.
http://www.youtube.com/watch?v=GCLnBOOiYfU
regards Martin.
http://www.youtube.com/watch?v=GCLnBOOiYfU
regards Martin.
#1635
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: Adrian_CH
Hello Martin,
What Type of Bertolani Brakes do you have ?
Air or Oil Brakes?
Greetings from Switzerland
Adrian
Hello Martin,
What Type of Bertolani Brakes do you have ?
Air or Oil Brakes?
Greetings from Switzerland
Adrian
ORIGINAL: mifsudm
i use the Bertolani air brakes system from Italy. i found them very good,
regards Martin.
i use the Bertolani air brakes system from Italy. i found them very good,
regards Martin.
#1636
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: mifsudm
i have attached a youtube with one of the flights for you to see.
http://www.youtube.com/watch?v=GCLnBOOiYfU
regards Martin.
i have attached a youtube with one of the flights for you to see.
http://www.youtube.com/watch?v=GCLnBOOiYfU
regards Martin.
Thanks for the video link.
#1637
My Feedback: (26)
Join Date: Sep 2005
Location: monterey,
TN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Spidernad,Tshark, Mario, Or someone, I have a funny question on my 35%TMMY Cessna 182. The hardware is pretty straight forward but I have a couple shafts here that have me puzzled. They are 4" long the dia is 8mm and they have a hole drilled in one end of the shaft.
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
#1638
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: smullis
Spidernad,Tshark, Mario, Or someone, I have a funny question on my 35%TMMY Cessna 182. The hardware is pretty straight forward but I have a couple shafts here that have me puzzled. They are 4" long the dia is 8mm and they have a hole drilled in one end of the shaft.
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
Spidernad,Tshark, Mario, Or someone, I have a funny question on my 35%TMMY Cessna 182. The hardware is pretty straight forward but I have a couple shafts here that have me puzzled. They are 4" long the dia is 8mm and they have a hole drilled in one end of the shaft.
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
EDIT: Go to my post here for pictures and more on wheel parts.
#1639
My Feedback: (206)
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: smullis
Spidernad,Tshark, Mario, Or someone, I have a funny question on my 35%TMMY Cessna 182. The hardware is pretty straight forward but I have a couple shafts here that have me puzzled. They are 4'' long the dia is 8mm and they have a hole drilled in one end of the shaft.
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
Spidernad,Tshark, Mario, Or someone, I have a funny question on my 35%TMMY Cessna 182. The hardware is pretty straight forward but I have a couple shafts here that have me puzzled. They are 4'' long the dia is 8mm and they have a hole drilled in one end of the shaft.
Did you guys get some of these and where do they go? I think they are from another plane design and were put in my kit by mistake. I have no clue! I don't see anything in the manual that even resembles these bolts or shafts.
Thanks fellows, Steve Mullis
George
#1640
My Feedback: (26)
Join Date: Sep 2005
Location: monterey,
TN
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Tshark, Man O Man. I guess I should have looked at the axles already in my plane before I jumped the gun on now that stupid question. LOL Well if you don't think I will need them sure you can have them. Just how easy are they to bend? Just send me a pm with your address and I will get them to you next week. How's that sound? I was gonna ask another question though. How long is your wingtube? Mine is only 33" long. Heck I got 3D Planes with longer tubes than that. I have not seen how deep they go into the wing yet. I will check it sat. Anyway I will just upload a few pic of the plane. I only have a few. Notice the exhaust though. I think it looks pretty scale looking. I cut down the stingers on my stock 3W Mufflers and used high temp 45 deg hose. I then had some old used 70mm drop headers cut the flange off and the curve of the pipes came out the cowl flaps. What do you think? Thanks for gettin back with me. Steve Mullis
#1642
Join Date: Jun 2012
Location: JOSHUA,
TX
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
I HAVE TO SAY, YOU GUY'S DID A GREAT JOB ON THE CESSNA 182. WATCHING THE VIEDO. WORKING INSTRUMENT PANEL AND PILOT. WISH I WAS 30yrs. YOUNGER. GOOD LUCK ON YOUR FLIGHTS. I REALY ENJOYED THE VEIDO'S HANK.
#1644
Member
Join Date: Feb 2008
Location: Pieta, MALTA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hi Guys, i have just upgraded my Cessna with a PowerBox competition SRS system because it is a must over here. all models weighting over 20Kg must have a dual redundancy system on board so that one can obtain an exemption from the civil aviation department to be able to fly the model.
regards
Martin.
regards
Martin.
#1645
Member
Join Date: Apr 2011
Location: Wohlen, SWITZERLAND
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Hello Together,
i have some Problems with my Model,see Pictures.
Whats your Solution?I think it is Balsawood inside without Glue.
Adrian
i have some Problems with my Model,see Pictures.
Whats your Solution?I think it is Balsawood inside without Glue.
Adrian
#1649
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
ORIGINAL: Adrian_CH
Hello Together,
i have some Problems with my Model,see Pictures.
Whats your Solution?I think it is Balsawood inside without Glue.
Adrian
Hello Together,
i have some Problems with my Model,see Pictures.
Whats your Solution?I think it is Balsawood inside without Glue.
Adrian
They should really do a better job in this area. Their quality has always been a little low, seems to be getting worse.
It will still work, but I would recommend to fill excessive empty spaces with scrap balsa and epoxy or other glue to make a stronger foundation for your hinge pins.
#1650
My Feedback: (28)
Join Date: Apr 2008
Location: , NJ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: TMMY Scale Composites 35% scale Cessna
Here is a couple of my posts on this area if it helps any.
http://www.rcuniverse.com/forum/fb.asp?m=10701465
http://www.rcuniverse.com/forum/fb.asp?m=10701900
http://www.rcuniverse.com/forum/fb.asp?m=10701465
http://www.rcuniverse.com/forum/fb.asp?m=10701900