TMMY Scale Composites 35% scale Cessna
The following users liked this post:
Super18 (01-16-2024)
#1980
My Feedback: (10)
Yes this is going to be fun, would like any help on finding more scale stuff i can put on, also would like to upgrade all the lights so any help on who has the best lights. Brakes? lenght of servo arms, servos are 7955 engine will be a Da 150. More info help would be nice, Thanks
#1981
best to research online to see what scale goodies to add, VOR, DME & Sat antennas etc. I had mine all done by JP. rudder peddals etc.
Still trying to sort G1000 screens for the dash.
As far as brakes go I have elektron but you will need to get machining done to wheel hub and an adaptor made. I still don't have mine back.
Can't help with servo lengths at this stage.
Still trying to sort G1000 screens for the dash.
As far as brakes go I have elektron but you will need to get machining done to wheel hub and an adaptor made. I still don't have mine back.
Can't help with servo lengths at this stage.
#1982
My Feedback: (10)
Ok time to order ,I wanta make sure im good to go, Da 150 with a biela 3 blade sport 28/12 prop with a 4 inch nose cone, looking at brakes has anyone put 6 inch wheels and a 5 inch nose wheel , as i see robart sell brakes for that size of wheel [6 inch] also going to order my lite kit would that be 1/3 scale or 1:2 scale kit. , looking at skycandy or unilite.
#1983
Not sure my diameter, might be larger than what you state. I'm getting elektron brakes fitted.
I've got unilights on my pawnee.
The Cessna came with AR system fitted, have not tried them as yet.
I've got unilights on my pawnee.
The Cessna came with AR system fitted, have not tried them as yet.