c.k.y.

Hi Blackout
Translator I hope you can understand !
Thank you for your interested in me products !!
The gearbox I design for my friend for the production of 'RTR' boat
In modern high-speed engine need to play with the gear box.( Because it can use a larger diameter and pitch of the propeller.The machine rod wear reduction, fast throttle response )
I took some photos provide some size chart for your reference. Is appropriate to use 'Hydro' size ( If you fit that I can sell to you. (Because my trial version of the little )
CKY

advanced builder

send me a PM on the price of one mount.

advanced builder

got a run in despite a work day. The safety fence is 1/2 done. felt good running 1/2 the buoys are done, that may change as I left early.

Blackout

Thanks for the prices on the gear drives CKY! Neil sent me your quotes. Prices seem very fair. I'll wait though. They might work well if I start working on my twin catamaran again, but that won't happen any time soon. Thanks!

advanced builder

ok I built the tub last night. the drive-line is ready to epoxy in. I have ordered a new engine mount from Zippkits ,push rod seals boom tube clamps. And a Zippkit T shirt with the JAE logo The tub top will be painted before I lay it down. the rest will be West epoxy finish.

c.k.y.

Hi Blackout
Thank you for your attention .
CKY

advanced builder

https://plus.google.com/photos/10056...Oej1anDlJ-tiQE
3rd channel will be added

Blackout

Nice Neil!! The plan is to have a 3rd channel needle in my 45 Zippkit rigger. Should be helpful when I start a race and I miss the needle and I'm running slow...

advanced builder

Craig I was just trying to run the hull. The 3rd channel is not being used yet. More time running the hull ,Ill get a handle on the speed. then use the 3rd When I restricted the water line that really woke up that engine. Our water is still cold. fun day anyways

c.k.y.

Share photos and video taken yesterday Outrigger boats. ( JAE and SG )
My own JAE couldn't take a walk[]

(The thrilling collision, but just broken outside and Paints !!) www.56.com/u96/v_OTEwNjMxMDE.html

www.56.com/u40/v_OTEwNzAwODU.html


www.56.com/u28/v_OTEwNzI0NDk.html



player.56.com/v_OTEwNjc0MDE.swf

advanced builder

thanks for the video's cky I have been doing work. I did finish sealing my new hull. linkage need to be installed. I will get some pics out soon. I need to break in a engine, first off.
I can run my old hull if needed.

advanced builder

ok were close to a launch. This is Zippkits new rear exhaust pipe mount. As you see I have a front exhaust. So I will not use it.
https://plus.google.com/photos/10056...CI7Z4dnigLvvNg
were on hold as the rain & wind are passing by.

mike walker

c.k.y
great pics and video, some nice looking boats

advanced builder

I did get some run time in. We broke in my NIB .21 CMB Vac ,got 5 full tanks in. No speed yet, very rich needle settings. I hope to run it Fri ,open waters, before the Sat race. We will have race videos ,soon the engine wants to run ,just not high speeds yet. Should be a fun weekend coming up. Weather looks good for the weekend. Also the hull ran flawless.

MarTay6

Hope I'm not stepping on any toes posting this here- I ended up not finishing my Zippkit .21 I started some time ago, and posted the motor for sale...
[link=http://www.ebay.com/itm/111072331963?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649]New Novarossi .21[/link]
Wes

advanced builder

here we go the#3 tipan cowl came from [email protected]

advanced builder

watch what happens the last Hr

MarTay6

Nice looking boat... makes me regret not finishing mine up- []
Wes

advanced builder

I won my first heat. Then went down hill from their. I could not get on pipe. I found a small piece of metal in my engine bay!! Gotta pull the engine and see what's up.

c.k.y.

VAC engine problems usually connecting rod
Connecting rod copper parts...
CKY

advanced builder

I believe I have a leak in my metal fuel tank. Every time I looked inside the tub, I had fuel inside my engine bay.I have pulled the tank and have it setting full on a white paper. That and I added .004 on the head button. I did notice some detonation on the head button. The case looked OK the metal may have come off my 3rd channel. It's more for a larger engine as the needle was tight all in. I needed more. I am using a different needle Fuel lines look OK The water line is restricted.

advanced builder

Fuel tank is OK fuel is coming out the carb. I cover up the metal tank whenever possible. I can add a fuel shut-off inline .
The H-7 prop works great.

advanced builder

getting my whip ready for testing

advanced builder

here we go
http://youtu.be/sBYsF1StLxM

Blackout

Any damage Neil?