what to get aeroworks 3dhs
#27
Senior Member
My Feedback: (1)
Join Date: Sep 2003
Location: surrey,
BC, CANADA
Posts: 3,775
Likes: 0
Received 0 Likes
on
0 Posts
RE: what to get aeroworks 3dhs
That's what I used, and is good for break in also.
Could try a 20x6 or 20x8 of other brands after break in,
Like vess etc. one should always have 3-4
Props handy and try out for personal taste
Could try a 20x6 or 20x8 of other brands after break in,
Like vess etc. one should always have 3-4
Props handy and try out for personal taste
#29
Senior Member
My Feedback: (1)
Join Date: Sep 2003
Location: surrey,
BC, CANADA
Posts: 3,775
Likes: 0
Received 0 Likes
on
0 Posts
RE: what to get aeroworks 3dhs
Nice
Kinda envious right now, it's a nice package
Gonna fly my 50cc extra and MXS-R
For a couple of months and then get another
AW 260 as a daily flier
Kinda envious right now, it's a nice package
Gonna fly my 50cc extra and MXS-R
For a couple of months and then get another
AW 260 as a daily flier
#32
Thread Starter
My Feedback: (146)
Join Date: Dec 2009
Location: plano, IL
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: what to get aeroworks 3dhs
Yes they do my aw 300 has one of there's .there's a guy on eBay I've been buying from lately very cheep and great spinners go to ebay and put in carbon fiber spinners he's in Virginia I think he goes by 25k just bought the 3" shipped for 28.00
#34
Thread Starter
My Feedback: (146)
Join Date: Dec 2009
Location: plano, IL
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: what to get aeroworks 3dhs
Well I just finished my new 260 free style I did go with the dle 35 ra vess 19a mks 1210 tg servos a123 battery's I'm very happy . Gunna fly it today for its first flight . I will let u all know my thoughts
#35
Thread Starter
My Feedback: (146)
Join Date: Dec 2009
Location: plano, IL
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: what to get aeroworks 3dhs
Before I report the 260 freestyle ,I've been flying pilot rc 3d hobby shop and bill hempel . I like big plane from the 126 " aj slick to 50% bill hempel edge and pilot rc 37.5 yak all awesome planes as far as I'm concerned these are the best arfs in the world . So now I try aeroworks . I have the 35% 3OO I love that plane so I figured I'd try the freestyle . Well today I put 5 flights on it . Love it love it love it !!!!! This small plane is my new everyday flyer as far as it goes it blows the 71" slick out of the water I'd even say its better then the 89" slick . I'm A 3d nut and that's all I fly . Thank all of u for telling me to buy this aw freestyle
#38
My Feedback: (28)
Join Date: Dec 2001
Location: Altoona,
IA
Posts: 1,488
Likes: 0
Received 0 Likes
on
0 Posts
The 260 is a great flying plane and I have around 50 flights on mine now but like previous posts said make sure you beef your landing gear plate up with some fiberglass matting and glue . I had the whole right side plate come loose and have never had a hard landing . Also some of the wood is poor quality and flakes apart . Their quality on some things isn't as good as what you would expect from Aero-works and the price is a little high . But over all its a great flying plane. I have DLE 35 on mine and I have used various props and have settled on the Xoar 19/8. I liked the xoar 20/6 but it was showing 8900 rpms on that prop before break in was done which is a little excessive
#39
Join Date: Mar 2010
Location: Houma, LA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I found the quality great on mine. Had an engine out on an up line and fell flat in the dirt. I'll admit in there attempt to build light the gear area is allittle weak but repairing was easy. All the same wood went back into place and haven't had trouble yet.