Engine conversion give away..
#1
Thread Starter
Engine conversion give away..
I have a few engines that are partly converted and will give them away. All I ask is for the shipping to be paid...free you pay shipping. I will post photos of them in about 3-4 days. When I post it will be first reply gets first choice. I have to much work to do on my 4 cyc Holt engine & other projects. Look at the link below...you will see the 4 cylinder holt I got to finnish. Capt.n http://picasaweb.google.com/rcnowjoh...PrVmo-eqsT1bw#
#2
Thread Starter
RE: Engine conversion give away..
If you went to the link in first post...the last Holt photos (after Grey Caterpillar) in the show is a Holt engine my friend made...not from castings. He done it the hard way??? He gives me very good tips on what how to do set-up ect. A very good machinist he is! Capt,n
#4
Thread Starter
RE: Engine conversion give away..
Here is a link to that Holt engine in post #1 It shows the Holt engine being started...ect! Capt.n http://www.youtube.com/watch?v=tl0nD1smbAg
#5
Thread Starter
RE: Engine conversion give away..
ORIGINAL: donoisten
Hi, from what area of mi are you from, I'm in the holland/douglas area. I would be interested in the motors.
Thanks,
Don
Hi, from what area of mi are you from, I'm in the holland/douglas area. I would be interested in the motors.
Thanks,
Don
#10
Join Date: Jul 2006
Location: port orange,
FL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine conversion give away..
Hi Cap. bomberbill here I have not seen your name in a while. I am looking for a G62 or equivelent engine have toy got on for sale or giveaway.
Bomberbill
PS you seem to be the expert on engine conversion TRUE???
Bomberbill
PS you seem to be the expert on engine conversion TRUE???
#11
Senior Member
Join Date: Mar 2007
Location: New Tazewell,
TN
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine conversion give away..
ORIGINAL: captinjohn
I have to go by what I posted in post#1 I will post photos of all engines, flywheels, extra carbs...many extra screws...ect from the products the engine were in. Thanks Capt,n
ORIGINAL: donoisten
Hi, from what area of mi are you from, I'm in the holland/douglas area. I would be interested in the motors.
Thanks,
Don
Hi, from what area of mi are you from, I'm in the holland/douglas area. I would be interested in the motors.
Thanks,
Don
#13
My Feedback: (2)
Join Date: Dec 2002
Location: Chiburbia,
IL
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine conversion give away..
ORIGINAL: captinjohn
I have a few engines that are partly converted and will give them away. All I ask is for the shipping to be paid...free you pay shipping. I will post photos of them in about 3-4 days. When I post it will be first reply gets first choice. I have to much work to do on my 4 cyc Holt engine & other projects. Look at the link below...you will see the 4 cylinder holt I got to finnish. Capt.n http://picasaweb.google.com/rcnowjoh...PrVmo-eqsT1bw#
I have a few engines that are partly converted and will give them away. All I ask is for the shipping to be paid...free you pay shipping. I will post photos of them in about 3-4 days. When I post it will be first reply gets first choice. I have to much work to do on my 4 cyc Holt engine & other projects. Look at the link below...you will see the 4 cylinder holt I got to finnish. Capt.n http://picasaweb.google.com/rcnowjoh...PrVmo-eqsT1bw#
You seem to be baiting a forum populated with bargain hunters,and motorheads with a promise of "free engines" that they cannot have quite yet.
In order to obtain said engine(s)they must "stay tuned" for three or four days,for you to get around to completing post #1 by adding the pictures.
ONLY at that time, can the member(s) "lucky enough" to be sitting around at the computer take one (or more?) of your engines/parts for the cost of shipping.
Do I have the gist of this game?
If I have it all wrong,please correct,and accept my apologies.
#14
Thread Starter
RE: Engine conversion give away..
ORIGINAL: av8tor1977
I have more than I know what to do with myself.... but thanks for the offer!
AV8TOR
I have more than I know what to do with myself.... but thanks for the offer!
AV8TOR
#15
Thread Starter
RE: Engine conversion give away..
ORIGINAL: nitro joe
I'm trying to wrap my brain around this...
You seem to be baiting a forum populated with bargain hunters,and motorheads with a promise of ''free engines'' that they cannot have quite yet.
In order to obtain said engine(s)they must ''stay tuned'' for three or four days,for you to get around to completing post #1 by adding the pictures.
ONLY at that time, can the member(s) ''lucky enough'' to be sitting around at the computer take one (or more?) of your engines/parts for the cost of shipping.
Do I have the gist of this game?
If I have it all wrong,please correct,and accept my apologies.
ORIGINAL: captinjohn
I have a few engines that are partly converted and will give them away. All I ask is for the shipping to be paid...free you pay shipping. I will post photos of them in about 3-4 days. When I post it will be first reply gets first choice. I have to much work to do on my 4 cyc Holt engine & other projects. Look at the link below...you will see the 4 cylinder holt I got to finnish. Capt.n http://picasaweb.google.com/rcnowjoh...PrVmo-eqsT1bw#
I have a few engines that are partly converted and will give them away. All I ask is for the shipping to be paid...free you pay shipping. I will post photos of them in about 3-4 days. When I post it will be first reply gets first choice. I have to much work to do on my 4 cyc Holt engine & other projects. Look at the link below...you will see the 4 cylinder holt I got to finnish. Capt.n http://picasaweb.google.com/rcnowjoh...PrVmo-eqsT1bw#
You seem to be baiting a forum populated with bargain hunters,and motorheads with a promise of ''free engines'' that they cannot have quite yet.
In order to obtain said engine(s)they must ''stay tuned'' for three or four days,for you to get around to completing post #1 by adding the pictures.
ONLY at that time, can the member(s) ''lucky enough'' to be sitting around at the computer take one (or more?) of your engines/parts for the cost of shipping.
Do I have the gist of this game?
If I have it all wrong,please correct,and accept my apologies.
#17
Thread Starter
RE: Engine conversion give away..
2 REPLYS Because of bad weather not going to UP this weekend.[] May go to a swap meet. Ralfpb from California talked about getting a Ryobi and Ki8fr wants a Hommie and may meet me and he may take over the give-away program. NitroJoe, I just want to clean house of engines I will never have time to finnish....before my wife kills me! Capt,n P.S. Any other better Ideas...People jump in.[X(]
#19
RE: Engine conversion give away..
For whomever sets this up, I am interested in a 15-18-20-22 cc weedeater engine for conversion. I have 23 and 25 and 32 cc ones, but would like to put a CDI on a small one for 60 size sport plane. I would even pay for one of the small ones, I can't seem to find one around here. Thanks.
Sincerely,
Dick Smith
Sincerely,
Dick Smith
#20
Thread Starter
RE: Engine conversion give away..
ORIGINAL: spaceworm
For whomever sets this up, I am interested in a 15-18-20-22 cc weedeater engine for conversion. I have 23 and 25 and 32 cc ones, but would like to put a CDI on a small one for 60 size sport plane. I would even pay for one of the small ones, I can't seem to find one around here. Thanks.
Sincerely,
Dick Smith
For whomever sets this up, I am interested in a 15-18-20-22 cc weedeater engine for conversion. I have 23 and 25 and 32 cc ones, but would like to put a CDI on a small one for 60 size sport plane. I would even pay for one of the small ones, I can't seem to find one around here. Thanks.
Sincerely,
Dick Smith
#21
Thread Starter
RE: Engine conversion give away..
ORIGINAL: Ralphbf
Thanks Capt,n
I'll take the Ryobi. The one you were trying to run on Gas, Glow.
We talked about it a few months ago, before your vacation.
Thanks Capt,n
I'll take the Ryobi. The one you were trying to run on Gas, Glow.
We talked about it a few months ago, before your vacation.
#23
Junior Member
My Feedback: (1)
Join Date: Jan 2008
Location: goodland, KS
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine conversion give away..
Captinjohn I was reading this incredible blog you posted about formulas for gas conversions do's and dont's It was sent to me in the form of a link.Before I could print it I lost the link .I have been searching and can't make it through the maze to find your hard earned wisdom concerning wackers to combo gas and glow.Also how to internally balance your
wacker engine.I have been sucessful so far with av gas and oil in my wackers(2 homelites) Does the flywheel act with centrfical force and help balance the engine.My email
[email protected] took me a lot of time to even find you
wacker engine.I have been sucessful so far with av gas and oil in my wackers(2 homelites) Does the flywheel act with centrfical force and help balance the engine.My email
[email protected] took me a lot of time to even find you
#24
Thread Starter
RE: Engine conversion give away..
ORIGINAL: spitncobra
Captinjohn I was reading this incredible blog you posted about formulas for gas conversions do's and dont's It was sent to me in the form of a link.Before I could print it I lost the link .I have been searching and can't make it through the maze to find your hard earned wisdom concerning wackers to combo gas and glow.Also how to internally balance your
wacker engine.I have been sucessful so far with av gas and oil in my wackers(2 homelites) Does the flywheel act with centrfical force and help balance the engine.My email
[email protected] took me a lot of time to even find you
Captinjohn I was reading this incredible blog you posted about formulas for gas conversions do's and dont's It was sent to me in the form of a link.Before I could print it I lost the link .I have been searching and can't make it through the maze to find your hard earned wisdom concerning wackers to combo gas and glow.Also how to internally balance your
wacker engine.I have been sucessful so far with av gas and oil in my wackers(2 homelites) Does the flywheel act with centrfical force and help balance the engine.My email
[email protected] took me a lot of time to even find you
#25
Junior Member
My Feedback: (1)
Join Date: Jan 2008
Location: goodland, KS
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine conversion give away..
cap I received your post about a give away.I sure could use some parts ,carbs any sort nuts bolts.I have dedicated a great deal of time to conversion and I am so enjoying my quest.I can paypal you some money for freight let me know .Whats left that is useful.I am mostly working with ryobi poulan 25to31cc a any help would be appreciated.you have already helped us all so much we are flatland flyers in goodland Kansas and I thank you for your knowledge.You must be cleaning house making room.Thank you have a great day