Falcon-X 3 channel
#26
Junior Member
Join Date: Mar 2010
Location: Perth, AUSTRALIA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon-X 3 channel
Hi i have a problem with my Falcon-X helicopter i just got it yesterday im not to sure what the name for this part is but heres a photo of it,
if anybody know where i can get that part please tell me(im not to sure if the pics there lol)[img]file:///F:/DCIM/100CANON/IMG_0278.JPG[/img]
if anybody know where i can get that part please tell me(im not to sure if the pics there lol)[img]file:///F:/DCIM/100CANON/IMG_0278.JPG[/img]
#28
Junior Member
Join Date: Apr 2010
Location: , IL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon-X 3 channel
I got this helicopter a couple of days ago. While using it, the throttle will randomly stick and I'll lose all control. It usually involves the helicopter flying straight up, then the motor cutting out. It does this on all three channels. All batteries in the controller are new and the helicopter battery is fully charged.
I also tested it while holding it and the throttle will stick at any speed, stay there for a few seconds, then cut out.
I also tested it while holding it and the throttle will stick at any speed, stay there for a few seconds, then cut out.
#31
Junior Member
Thread Starter
Join Date: Dec 2008
Location: Charlotte,
NC
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon-X 3 channel
Change the batteries in your transmitter.! Use quality alkaline batteries. I use only Duracell, just my preference. Also, make sure you don't have a bunch of sun light coming in the windows. The remote works with infared light like a TV remote and they don't work outside.
Steve
Steve
#33
Junior Member
Join Date: Apr 2010
Location: kerala, INDIA
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: Falcon-X 3 channel
my 3ch mini falconx is acting little strange
when it lifts it is out of control . going back and forward without any command
first of all it happened after a crash landing
i think its because of the fly bar.
pls watch the video and pics and help me to fix it.
i just bought a week ago plss help
[/youtube][youtube][/youtubehttp://www.youtube.com/watch?v=2Y3PM7mojZs
#34
RE: Falcon-X 3 channel
Guys i have a question....
I see that some sellers sell Falcon-X's with two links between the upper main rotor &
the stabilization bar,
while others sell them with one link only,
like this guy:
[link=http://www.ebay.com/itm/160697252631?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649]falcon-x 1 link![/link]
Seller replied to me that original ones have only 1 link,
while the copies have 2!!!!
What do you say;
I don't see any other optical difference.
I see that some sellers sell Falcon-X's with two links between the upper main rotor &
the stabilization bar,
while others sell them with one link only,
like this guy:
[link=http://www.ebay.com/itm/160697252631?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649]falcon-x 1 link![/link]
Seller replied to me that original ones have only 1 link,
while the copies have 2!!!!
What do you say;
I don't see any other optical difference.