joeysan2

Hey all, Im am in need of a coupler that will work with a Mystery outrunner. The shaft dia. is 2.3 mm. I plan to connect it to a .125 flex cable. I have had no luck in finding one. Any iedas? Any one have one they could part with?
Thank you
Joe

nick 30

try your local engineering shop and see if they can make youup one, i know of places in the UK but not in the US

SV27dayton

You aren't going to get one for under $50 that way. There has to be a box on a shelf somewhere that has 30 of them in it somewhere.

nick 30

i get them made up by a friend to the specs i need here in the UK for £10

SV27dayton

Man I may re-think what I said. That's a pretty wierd combo.

joeysan2

Yeah it does seem kind of odd. The .125 flex shaft was the origional set up. I got the Mystery motor later, it just happens to have a 2.3mm shaft. I will probably rethink the set up, but would still like a coupler to fit this motor.
Cheers
Joe

justintime2w8

My Feedback: (1)

http://cgi.ebay.com/ws/eBayISAPI.dll...ht_2053wt_1024
Should work, cheap too. I used two a while ago.

Jeff Wohlt

I have been making several for that size. Let me know if you want any.

joeysan2

Jeff, Yes I would like one or two. Let me double check the size and I will get back to you. I will e-mail your store.
Thanks
Joe.

Jeff Wohlt

That is fine...I already have the bits. Nothing odd about that shaft but if you are going to power it up I wuold consider 130 cable. That is what I have made most of. 098 cable may be ok of you keep smaller props.

joeysan2

Hey Jeff; I sent an e-mail to [email protected]. Not sure if that is the correct address. I would like 2 couplers at 2.3mm (motor shaft) by .130 (Flex shaft). Let me know the price, I may only get one. Not to be cheap buy baby is on the way! You can PM me here.
Thanks
Joe

Jeff Wohlt

Joe, I did not get anything...it have gone to spam. How many do you want? I will invoice you thru paypal if you give me your e-mail address.

joeysan2

Jeff, I will take one coupler please. My e-mail is [email protected]
Thanks

Diegoboy

...

Jeff Wohlt

Are oyu sure the cable is 125 or could it be 130 cable? What is it off of to have 125 cable?

joeysan2

It is a .130 cable
Joe

Jeff Wohlt

Done and shipping on Wed. for you.

Thanks