Extreme Flight 88" Yak - Build and Fly
My Feedback: (10)
Join Date: May 2005
Location: Belton,
TX
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: Slow and Steady
I use Life and measure use by fully charging at field before 1st flight. Keep track of minutes on each flight and recharge when 4 flights completed. Divide Mah added by total minutes or total flights, provides mah used per average flight.
I use Life and measure use by fully charging at field before 1st flight. Keep track of minutes on each flight and recharge when 4 flights completed. Divide Mah added by total minutes or total flights, provides mah used per average flight.
Senior Member
Join Date: May 2009
Location: Fort Lauderdale, FL
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
I gave up on NMH about a year ago. Have used Lipos for my receiver since then, until about two months ago when I switched to Life. Don't know whcih I prefer more, the Life or Lipo. Life seem to be more stable. I have also heard recently that the charger I used on my Nmh batteries was not very accurate at topping them off, which may have contributed to their performance.
Senior Member
My Feedback: (29)
Join Date: Sep 2004
Location: marana,
AZ
Posts: 2,729
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
charles that sounds like a lot of work....im going with a123 on the big one, my edge will stay methdrides for now, i know my current set up can fly me for a day without charging so thats enough info for now on these batteries.....thanks for the helps
Senior Member
Join Date: Apr 2004
Location: saint andre de cubzac, FRANCE, METROPOLITAN
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
hello,
i have now nine flights on mine (four today), my CG is too aft for me but the most important problem: i have to add about 31 clicks of uptrim on elevator (5 mm of throw). It was most important before today because i have now nearly one degree of upthrust. Do you have a solution (i have already check incidence and it seems ok, i have to check that another time to be sure) ?
Thanks
Stephane
i have now nine flights on mine (four today), my CG is too aft for me but the most important problem: i have to add about 31 clicks of uptrim on elevator (5 mm of throw). It was most important before today because i have now nearly one degree of upthrust. Do you have a solution (i have already check incidence and it seems ok, i have to check that another time to be sure) ?
Thanks
Stephane
Senior Member
Join Date: Jan 2003
Location: Buford,
GA
Posts: 779
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
Stephane, no upthrust is needed. The Yak should be set up 0-0-0, which is 0 degrees for engine, 0 for wing and 0 for stab. Check to make sure their is no reflex in your ailerons and confirm proper CG using the 45 degree line test.
Senior Member
Join Date: Apr 2004
Location: saint andre de cubzac, FRANCE, METROPOLITAN
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
thanks chris,
i though strange to put upthrust, but i have to change my CG and check another time everything to solve my problem (0 degree everywhere). What is reflex chris ?
Stephane
i though strange to put upthrust, but i have to change my CG and check another time everything to solve my problem (0 degree everywhere). What is reflex chris ?
Stephane
Senior Member
Join Date: Apr 2004
Location: saint andre de cubzac, FRANCE, METROPOLITAN
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ok i understand, but i dont think it is my problem. I will check another time incidence to be sure and will tell you...
Stephane
Stephane
My Feedback: (6)
Join Date: Dec 2001
Location: Georgetown,
IN
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: diamondave
plus, i forgot to say im kinda thinking ahead a bit, if ef announces a 80cc or 100cc edge at some point i most likely would sell my 88 edge to try and get the bigger one, like i did with my 88yak, then i transport the 2300s into that one, darn ef always making me want new and more expensive planes
plus, i forgot to say im kinda thinking ahead a bit, if ef announces a 80cc or 100cc edge at some point i most likely would sell my 88 edge to try and get the bigger one, like i did with my 88yak, then i transport the 2300s into that one, darn ef always making me want new and more expensive planes
Jeff
My Feedback: (6)
Join Date: Dec 2001
Location: Georgetown,
IN
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: cjcyclesrc
Cool. One of my friends brought out an OS 55 this weekend at the Austin big bird. It's seems to be a great running engine. I wish I could get loose from work to go to the King 50. I've got my 88'' Edge dialed in and ready.
ORIGINAL: JWilliams
Getting the yak dialed in for the King 50. The OS55 is really running good, idles about 1700 and top end at 7400 with a 22 X 8, going to a 23 X 8 tomorrow will post results.
Jeff Williams
Getting the yak dialed in for the King 50. The OS55 is really running good, idles about 1700 and top end at 7400 with a 22 X 8, going to a 23 X 8 tomorrow will post results.
Jeff Williams
Jeff Williams
My Feedback: (10)
Join Date: May 2005
Location: Belton,
TX
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: JWilliams
Charles, guess we will miss each other at Atlanta this year since Chris moved it to Macs. He might do it next year in October he said, just not an official huckfest. Anyway, yes my OS55 is running great, I am pleasantly surprised as I am a die hard DA guy.
Jeff Williams
ORIGINAL: cjcyclesrc
Cool. One of my friends brought out an OS 55 this weekend at the Austin big bird. It's seems to be a great running engine. I wish I could get loose from work to go to the King 50. I've got my 88'' Edge dialed in and ready.
ORIGINAL: JWilliams
Getting the yak dialed in for the King 50. The OS55 is really running good, idles about 1700 and top end at 7400 with a 22 X 8, going to a 23 X 8 tomorrow will post results.
Jeff Williams
Getting the yak dialed in for the King 50. The OS55 is really running good, idles about 1700 and top end at 7400 with a 22 X 8, going to a 23 X 8 tomorrow will post results.
Jeff Williams
Jeff Williams
Senior Member
My Feedback: (29)
Join Date: Sep 2004
Location: marana,
AZ
Posts: 2,729
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: JWilliams
RJ Gritter flew a prototype at the XFC this summer.
Jeff
ORIGINAL: diamondave
plus, i forgot to say im kinda thinking ahead a bit, if ef announces a 80cc or 100cc edge at some point i most likely would sell my 88 edge to try and get the bigger one, like i did with my 88yak, then i transport the 2300s into that one, darn ef always making me want new and more expensive planes
plus, i forgot to say im kinda thinking ahead a bit, if ef announces a 80cc or 100cc edge at some point i most likely would sell my 88 edge to try and get the bigger one, like i did with my 88yak, then i transport the 2300s into that one, darn ef always making me want new and more expensive planes
Jeff
My Feedback: (6)
Join Date: Dec 2001
Location: Georgetown,
IN
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
Oh, I thought you meant an Extra. Whooooooooops.
I am sure Chris wants to do a larger Edge, I will talk with him about it next week at the King 50.
Speaking of King 50, getting my borrowed from Chris Hinson 88" Yak dialed in and looking forward to flying it in the King 50 next week.
Jeff Williams
I am sure Chris wants to do a larger Edge, I will talk with him about it next week at the King 50.
Speaking of King 50, getting my borrowed from Chris Hinson 88" Yak dialed in and looking forward to flying it in the King 50 next week.
Jeff Williams
My Feedback: (6)
Join Date: Dec 2001
Location: Georgetown,
IN
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
Cycles, the unofficial is not till next year (if then). Chris said he has been to so many events this year he is just worn out.
Jeff
Jeff
Senior Member
Join Date: Jan 2007
Location: perryville,
MO
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
well my yak is toast...deadstick. coming in to hot with wind at my back. I was at a fly-in to many people to land anywhere but the runway, tried to land in the bean field but overshot it, hit at tree. so, should I get an EF extra or an EF edge? power plant is going to be a BME 58. Do you think the nostrils in the cowl will effect the side carb of the BME?
My Feedback: (41)
RE: Extreme Flight 88
Sorry to hear about that. If I were you I'd get the Edge. It's new. I wouldn't worry about the side carb. You can put a velocity stack on it to clean up incoming air.
My Feedback: (11)
Join Date: Mar 2002
Location: Randolph,
NJ
Posts: 2,313
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
ORIGINAL: JoeAirPort
Whoa over 10,000 posts. I need help.
Whoa over 10,000 posts. I need help.
Frank..
PS get the Edge !
My Feedback: (41)
RE: Extreme Flight 88
ORIGINAL: xtraflyr
DANG Joe ! You need a life man !!hahaha!! And they call my friend the ''Keyboard Flyer''!!
Frank..
ORIGINAL: JoeAirPort
Whoa over 10,000 posts. I need help.
Whoa over 10,000 posts. I need help.
Frank..
Member
Join Date: Mar 2010
Location: East Rockaway, NY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
RE: Extreme Flight 88
I know Frank. It's crazy. If you click on the number of posts above my avatar it shows you the number in each year. 2004 was my sickest year. Almost 4000 posts. Last year was the 2nd most. This year is the lowest. Maybe I'm starting to wear down.
Anyway, out for some more yakin off on my 21st b-day. Sunny, 75 and light wind. Should be a great day.
My Feedback: (41)
RE: Extreme Flight 88
And this time I saw the crappy weather coming so I took Friday off work. Yessssssssssss!
Today I went back to my Xoar 22x8. Big mistake. I'm switching back to my MSC 22x8. It's a waaay better 3D prop.
Today I saw an EF 78" Extra 300 go in. Sniff sniff. Like losing a family member. The older gent has trouble seeing and flew way too far out. Lost it. Not sure if they ever found it. Sad.
Today I went back to my Xoar 22x8. Big mistake. I'm switching back to my MSC 22x8. It's a waaay better 3D prop.
Today I saw an EF 78" Extra 300 go in. Sniff sniff. Like losing a family member. The older gent has trouble seeing and flew way too far out. Lost it. Not sure if they ever found it. Sad.