Byron Cap 231 flight performance needed
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Aug 2004
Location: Corvallis,
OR
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Byron Cap 231 flight performance needed
I have just completed a Byron cap 231 and was hoping someone has some experience with them. There are currently no discussions on the 231, only the 21 (the snappy cappy). Everyone I talk to assumes I have the 21 or is the 231 as bad as the 21? Any suggestions on flight and setup are greatly appreciated. I do not have the final weight on it but here is the rest of the specs.
glass fuse sprayed with PPG
foam core wings covered with monokote
stock overweight gear
dual elevator servos in the rear
dual aileron servos in the wings
ST 4500
power box
plenty of throw for 3d perf
I will be hopefully heading to the field to taxi run this weekend if all goes well.
Any suggestions?
glass fuse sprayed with PPG
foam core wings covered with monokote
stock overweight gear
dual elevator servos in the rear
dual aileron servos in the wings
ST 4500
power box
plenty of throw for 3d perf
I will be hopefully heading to the field to taxi run this weekend if all goes well.
Any suggestions?