Tail Rotor Popping OFF!!!!!!!
#1
Senior Member
Thread Starter
Join Date: Feb 2008
Location: , PA
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Tail Rotor Popping OFF!!!!!!!
So, took out the tail rotor. Ordered two up. Well, first one broke when I was putting it on. Put the second on, and it keeps popping off in flight How the heck do you keep these things on?!?!?!?![:@] Thanks!
Also, once the new rotor was on, the heli was yawing left horribly, even with full right trim. So, I tried to adjust the gain, and now it's really messed up. What can I do? [:@] Thanks
Also, once the new rotor was on, the heli was yawing left horribly, even with full right trim. So, I tried to adjust the gain, and now it's really messed up. What can I do? [:@] Thanks
#2
Senior Member
Join Date: Dec 2008
Location: Denver,
CO
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tail Rotor Popping OFF!!!!!!!
Make sure you are putting the tail rotor on the right way. Putting it on the wrong way will cause it to fly right off and it will also spin it uncontrollably.
#3
Senior Member
Thread Starter
Join Date: Feb 2008
Location: , PA
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tail Rotor Popping OFF!!!!!!!
Thanks for the reply. I considered that, so I switched it around. The tail is still wild. But for the record, which way IS the correct way? I'm guessing the way which pushes the prop in towards the motor so that it doesn't pop off, right? Common sense, right?