How I shim an XL Diff. Save your pinions!
05-18-2010, 11:08 PM
#26
Senior Member
Thread Starter
Join Date: Apr 2009
Location: CHICAGOLAND,
IL
Posts: 1,856
Likes: 0
Received 0 Likes
on
0 Posts
RE: How I shim an XL Diff. Save your pinions!
Bump.
I didn't see anything "rated" for 7 pages.
You guys must be a bunch of lame asses these days.
There should be an update about the bulletproof diffs here somewhere...
http://************.com/
I didn't see anything "rated" for 7 pages.
You guys must be a bunch of lame asses these days.
There should be an update about the bulletproof diffs here somewhere...
http://************.com/
09-17-2010, 11:39 AM
#28
Junior Member
Join Date: Sep 2010
Location: Cumbria, UNITED KINGDOM
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: How I shim an XL Diff. Save your pinions!
Hi,
This is a very informative thread thanks. I have been looking at a couple of guides and the all seem to put the diff back in witht the two screws then moove it side to side where as yours says p and down please could you explain as I am a bit lost here (sorry for the stupid question). Also is there a picture of the shimming the pinion gear.
Also I have heard that you can shim the spider gears by putting shims under the pin which holds the axles on are you awares of any pics turotials for this?
I just want to get my bp diffs right
Any help is appriceted
This is a very informative thread thanks. I have been looking at a couple of guides and the all seem to put the diff back in witht the two screws then moove it side to side where as yours says p and down please could you explain as I am a bit lost here (sorry for the stupid question). Also is there a picture of the shimming the pinion gear.
Also I have heard that you can shim the spider gears by putting shims under the pin which holds the axles on are you awares of any pics turotials for this?
I just want to get my bp diffs right
Any help is appriceted
