Pitts532M

My Feedback: (1)

Anyone have the dihedral measurement for a SR Falcon,

gunneredwards

My Feedback: (4)

Last one i had, the dehedral was just measured at one wing tip with the other wing flat on the table and mine had 1.5 inches... I am not sure, but think the plans stated 2-3 inches but i made mine a little more aggressive.
dan

Jose Machado

I put in mine about 30 years ago, cero dihedral,it flied great

Rodney

I built and flew several of these. After the first one, I built all the wings flat (no dihedral) as they flew better with more roll authority.

Bax

My Feedback: (11)

The original plans called for 4-3/4" under the tip rib of one wing panel when the other wing panel was laid flat on the building table.

Pitts532M

My Feedback: (1)

Thank-you, Mike