ringneck

well ive seen threads for rtr trucks and pro trucks so i feel i need to start a st pro thread. i just picked up mine today and well its a KIT!!!! thats right the only thing that is assembled is the 6 gear center spider diff. it comes with a fuel bottle and ultra cool wheels and the new body it thick and ultra cool to. but the parts quality looks real good and god those shock towers! i think they are 7mm thick and the wheels are the same diameter as the losi 8t wheels so losi tires will work on the hyper rims! thats good news as you will have tire options and you will have more after proline releases their new tires as well this kit looks awsome comes with 35wt shock oil and 7k diff oil as well. but man the aluminum parts look like REAL quality i think hoabo has really steped it up in the quality department. 468.00 is what i paid and it was worth it now i will post back after i get itup and runnin have a trophie race on sunday so i need to get to work plus i also need to break in a vspec before then to. so i you like truggy KITS this could be right up youre ally.

j_blaze

I'll be having one of these baby's soon enough. It just looks too good.

MT

This may be my next trug, I think they look great!

annie_himself

Pics are worth 1000 words.

ringneck

does anybody here ever log onto truggyracers.com? is it just me or is that web site dead in the water? i never see anybody posting on there anymore.[&o]

Coopz

I visit it a few times a week.

wrat

hello lads..ive got a new hyper st pro and its huge.bigger than i thought.
im running a sts.d30m.3000/10000/7000.
drilled piston holes to 1.4 with 45 weight ..just done a radio box conversion and its easy..the hyper 8.5 box fits nice..



radio box

pballdale

Need some help with my hyper! I am rebuilding the centre diff ( to put oil in ) from my new kit, and two of the screws have been rounded out, ffs stupid red loctite [:@] Does anyone have tips on how i could remove these screws! I need help I have got some spare screws for, but before i drill out these screws is there any less barbaric way of doing it?
thnx,

ps: i have the uk spider diff version :P

j_blaze

Look at those pictures[X(], thats exactly what I'm talking about. It looks like nothing else out there.

taj

when are they going to be available

wrat

i take it its the screws under the chassis that go into your diff holder....i would use a dremil with a small disc and cut a straight line so you can use a flat head screwdriver..if you have access to a small hobby blow torch then heat the screw up from underneath..be realy careful..your not trying to burn the thing just heat it up slowly..that should losen the glue..dont burn yaself..or drill the head of the screw off ,so you can pull it thru..
hope this helps

pballdale

Nope the screws on the diff its self [:@]

j_blaze

Nitrohouse.com has them for $474+shipping, only place I have found it so far.

wrat

the ones on top...then there easier to do...just cut a straight grove thru them for a flathead screwdriver..make sur you use a big driver tho .more leverage..

pballdale

Nvm sending back to Cml hopefully for a replacement

Harvz

I just got a Hyper ST RTR roller. What do I need to make it pro ?

Coopz

Quite a few things.. Have a look here.
http://www.hobao-racing.com/products...hyperSTpro.php
Tells you what was changed.

Harvz

Hey wrat, how did you installed the Hyper 8 receiver box? I like the way you did it, it's neat, will done. I hate the box like the one on Hyper 7.

thunderw0lf

Wasn't for needing a water heater I'd have one on the way

pballdale

http://www.rcuniverse.com/gallery/ga...berID%3D358262

pic of my build so far..

HerrSavage

Where can you buy these, and what do they cost? I'm gonna need a winter project, and this thing appeals to me... (I only bash and I like what I hear about how tough these ST's supposedly are..)

j_blaze

Nitrohouse.com has them for $474+shipping, only place I have found it so far.

ringneck

well if anybody is interested in buying a new hyper st pro i have mine for sale i bought it friday and assembled it saturday and ended up picking up another ride today at the track i installed a new vspec in it and idled one tank through it last night and thats it the tires are still not glued i will let it go for 380.00 and buyer will pay for shipping like i said its still a new truck but i feel since i put fuel in it i need to sell it at a uesed price. pm me if interested

thopper

If that price includes a new vspec that is a great deal....does it?

1099hammer

drill head of screw with drill bit one size larger than the screw" slowly " until head pops off then using good small pliers try turning stud out