wing saddle potting
06-19-2010, 06:09 PM
#1
Thread Starter
My Feedback: (2)
Join Date: Jul 2002
Location: Calgary, AB, CANADA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
wing saddle potting
Anyone have a good method for potting in Q40 wings with a 'somewhat flexible' material like silicone or urethane or.... Im familair with the usual 'hard' technique using epoxy based splooge. But I would prefer just like a bit of 'give' & vibration dampening. Its not a big gap, its pretty close, so the potting thickness would be quite thin in areas. Ive heard there are brands of caulking that work like outdoor paintable sealant, but I must be buying the wrong stuff. I cant get it to release clean using my usual technique of shiny packaging tape on the wing + mold release wax. I have some kickbutt mold release but silicone doesnt seem to like to cure on it.
/pt
/pt
06-19-2010, 06:33 PM
#3
Thread Starter
My Feedback: (2)
Join Date: Jul 2002
Location: Calgary, AB, CANADA
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
RE: wing saddle potting
I use silicone glue not sealent and wax paper.There is a difference.
