sealing gaps
#1
Thread Starter
sealing gaps
Whats the best way to seal control surface gaps i.e. ailerons,rudder etc., Ive heard there was a plastic tape or something you can use,,,,if so where do I get it?
ThanksTAZZZZ
ThanksTAZZZZ
#2
Senior Member
Join Date: May 2008
Location: Northern Occupied Mexico,
CA
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
RE: sealing gaps
It's called BlenDerm Medical Tape.
It is probably going to be a online buy but might be available in pharmacies.
If your plane is covered though then covering of the same color or clear covering is best.
Either way seal the gaps. It make a huge difference in the performance of the plane.
It is probably going to be a online buy but might be available in pharmacies.
If your plane is covered though then covering of the same color or clear covering is best.
Either way seal the gaps. It make a huge difference in the performance of the plane.
#3
Senior Member
RE: sealing gaps
Best? What's the current covering? Is it a simple color on both fixed and moveable surfaces? Is it complex with many trim pieces thru the gap? Is it electric, gas or glow? So many questions. Enquiring minds need to know.
#5
My Feedback: (23)
RE: sealing gaps
ORIGINAL: 1320Fastback
Either way seal the gaps. It make a huge difference in the performance of the plane.
Either way seal the gaps. It make a huge difference in the performance of the plane.
I would love to see some hard evidence of this! I've had many speed planes, and anything under 120mph sealing the gaps did nothing but take time! Really, i never noticed more than 1 or 2 mph between speeds of 120-150mph. Once the speeds started reaching 160+ it made a difference...
The BEST way I have ever made a noticeable difference, was Ensuring a TIGHT hinge gap between the control surface and the wing/tail. That makes more of a difference than sealing the gaps.
#6
Member
Join Date: Mar 2012
Location: raymore, MO
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: sealing gaps
Dubro hinge tape. I used it to stop the "whistling" noise in my stick. Clear so you don't even see it. Unless you know it's there! It helped my "whistling" noise..
#7
My Feedback: (8)
RE: sealing gaps
You can use clear covering, but tough to keep anything permanently sticking if you've already slimed the plane.
I can't say much about the performance gain - I have yet to fly a plane w/o hinges sealed and then with them sealed, however I did just seal the gaps on my contest plane so I should know by this weekend
Aerodynamically speaking, it's easy to see how the plane would fly/respond better with the gaps sealed. It should be more consistent, with more control surface authority due to less high pressure spillage through the gap. Similar to the 'winglets' you see on the tips of commercial airplanes - they're all doing it now, 'cause the spillage of the high pressure air under the wing around the wing tip decreases lift/efficiency.
I can't say much about the performance gain - I have yet to fly a plane w/o hinges sealed and then with them sealed, however I did just seal the gaps on my contest plane so I should know by this weekend
Aerodynamically speaking, it's easy to see how the plane would fly/respond better with the gaps sealed. It should be more consistent, with more control surface authority due to less high pressure spillage through the gap. Similar to the 'winglets' you see on the tips of commercial airplanes - they're all doing it now, 'cause the spillage of the high pressure air under the wing around the wing tip decreases lift/efficiency.
#8
My Feedback: (22)
RE: sealing gaps
ORIGINAL: invertmast
I would love to see some hard evidence of this! I've had many speed planes, and anything under 120mph sealing the gaps did nothing but take time! Really, i never noticed more than 1 or 2 mph between speeds of 120-150mph. Once the speeds started reaching 160+ it made a difference...
The BEST way I have ever made a noticeable difference, was Ensuring a TIGHT hinge gap between the control surface and the wing/tail. That makes more of a difference than sealing the gaps.
ORIGINAL: 1320Fastback
Either way seal the gaps. It make a huge difference in the performance of the plane.
Either way seal the gaps. It make a huge difference in the performance of the plane.
I would love to see some hard evidence of this! I've had many speed planes, and anything under 120mph sealing the gaps did nothing but take time! Really, i never noticed more than 1 or 2 mph between speeds of 120-150mph. Once the speeds started reaching 160+ it made a difference...
The BEST way I have ever made a noticeable difference, was Ensuring a TIGHT hinge gap between the control surface and the wing/tail. That makes more of a difference than sealing the gaps.
John
#10
Senior Member
RE: sealing gaps
Sealing the hinge gaps does make a difference you can feel. If it didn't, why not make the hinge gap as wide as you want, instead of trying to make it as small as possible? A small hinge gap that is sealed will not only improve performance, but helps prevent flutter (notice I said helps). I use the covering I covered the plane with. I've even used multiple overlapping strips to blend with the different colored trim schemes. This is purely aesthetic, as I don't like the "bubbles" that clear tapes produce.
I highly recommend sealing hinge gaps.
Oly
I highly recommend sealing hinge gaps.
Oly