Gas tank position - below motor??
#1
Junior Member
Thread Starter
Join Date: Jan 2016
Location: Sault Ste Marie, Ontario, Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Gas tank position - below motor??
Hello,
I'm really confused with this issue. I just built a small airboat with a OS MAX 25FP and I mounted the gas tank (6oz.) below the motor but I am having trouble with the fuel siphoning and having to constantly prime the fuel line. Do people use something like a one-way valve in the fuel line?
How do you guys do this? I'm baffled.
Thanks
I'm really confused with this issue. I just built a small airboat with a OS MAX 25FP and I mounted the gas tank (6oz.) below the motor but I am having trouble with the fuel siphoning and having to constantly prime the fuel line. Do people use something like a one-way valve in the fuel line?
How do you guys do this? I'm baffled.
Thanks
#2
Hello,
I'm really confused with this issue. I just built a small airboat with a OS MAX 25FP and I mounted the gas tank (6oz.) below the motor but I am having trouble with the fuel siphoning and having to constantly prime the fuel line. Do people use something like a one-way valve in the fuel line?
How do you guys do this? I'm baffled.
Thanks
I'm really confused with this issue. I just built a small airboat with a OS MAX 25FP and I mounted the gas tank (6oz.) below the motor but I am having trouble with the fuel siphoning and having to constantly prime the fuel line. Do people use something like a one-way valve in the fuel line?
How do you guys do this? I'm baffled.
Thanks
When the engine is running, the fuel should not siphon back due to the fuel draw of the engine. The only way to combat the fuel siphoning is to mount the fuel tank behind the engine ensuring the center of the tank doesn't sit above the center of the carburetor (spraybar). Do not use a check valve in the feed line - you will have carburetion problems.
#3
Junior Member
Thread Starter
Join Date: Jan 2016
Location: Sault Ste Marie, Ontario, Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I may redesign my next air boat and have the fuel tank behind the motor as you mentioned. But I do like the looks of having the fuel tank below.
#4
Most engines will draw fuel fine when the tank is right under the engine - any more than that and the engine may have issues.
#5
#6
Junior Member
Thread Starter
Join Date: Jan 2016
Location: Sault Ste Marie, Ontario, Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Here are plans for my first electric air boat - I still run this one - goes good in show - flyingblog.primaveraphoto.com/snow-water-bug-prototype-and-plans
Last edited by MarkPrima; 03-07-2017 at 03:57 AM.
#8
Join Date: Jan 2017
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
you still have enough space to put the fuel tank behind the engine. having the tank down low will not only effect starting and running issues but also you will get lean runs which is no good for the engine.
#9
There's no issue with the engine drawing fuel with the tank underneath the engine. I have done some testing with a fuel tank 6" below the engine and.3" behind it and the engine ran well. You have to compensate with the needle settings a bit. Lean runs happen because of improper needle settings. The FP engines have tiny Carburetors, so they draw fuel well. Other than fuel siphoning when the engine isn't running, there should be no other problems.