3dmagic

My Feedback: (9)

here is the boat that harold at cajun gator boats built for me and let me tell you it is top notch worth every penny.
i just got one break in tank threw it today one more tank and its gonna hit the water.

hpiguy

Nice machine!

Price? And of course we will all want videos!

3dmagic

My Feedback: (9)

it was 995.00 and i will have some video soon my pond isnt full enough to run it. i need to call my nieghbor and see if i can run it in his pond. hopefully tomorrow.

hpiguy

Can't you run it on grass, mud, lilypads etc?

No need for a full pond.

3dmagic

My Feedback: (9)

well first off my pond was finished this year so it hasnt completely filled up it still has about 20 feet to go and there are trees sticking out of the water. they will be under the water when it fills up. as far as grass i dont have much because we just finished leveling our land so grass
is far and few between. i just talked to my neighbor and he said i could use his pond so probably thursday i will have some action shots at the very least. i could run it on dirt but the motor would suck in the dust just in case you asked.

jasperrc

Ok, we'll wait until Thursday, maybe Friday morning, but please don't make us wait longer for vids

Nice boat! Have fun with it.

3dmagic

My Feedback: (9)

heres it is, the boat hops in the turns i dont know why maybe some of you could give me some advice. the pond was a little small to go wide open but i tried and hit the bank a few times but no damage. my pond is 500 feet long so when it fills i will be able to open her up and get some speed. [link=http://s20.photobucket.com/albums/b235/wickedinhere/?action=view&current=airvideo.flv]video[/link]

crispyspa

SWEET!!!!!! but......Why no sound???? Strapped a GPS to it yet?
What are the specs on that ?
length? Width? Weight? HP? Prop size......you know the drill.

3dmagic

My Feedback: (9)

the camera i used doesnt have sound for the video part . i need to get a dvd camera anyway the boat is 22 inches wide and 43 inches long
the prop is a 16x10 master aircsrew.hp is 2.2 it weighs i think 18 lbs harold told me how much when i picked it up but i cant remember but i am pretty sure it was 18lbs.

Mr Cajun Gator

The hop in the turns is coming from the inside chime rake. If your slowing down in the turns, the boat is at the point of getting off of step and trying to get back on. Adding in a second lifting block on the side chime rakes, located even with the rear radio box bulkhead, will help to lay the hull back flat. First try slowing a little before the turn, then power back up some in the turns. How is it running on the SAW's? Does it have a good speed? Needing any more or less power?

3dmagic

My Feedback: (9)

its got plenty of speed. that pond in the video its nearly big enough. i will try what you suggested next time i run it. the boat sure is a lot of fun.