Official E-FIRESTORM thread
#2901
Senior Member
Join Date: May 2008
Location: PalmerstonOntario, CANADA
Posts: 9,180
Likes: 0
Received 1 Like
on
1 Post
RE: Official E-FIRESTORM thread
ORIGINAL: ScottStaypuff
WOW!
I made it to the track tonight for some fun runs with my buddy. I took some pics/video, will have to post them.
1st pack, 1800mah, broke it in on that.
2nd, 5000mah, ran very good
3rd and 4th, 8.4v 3300mah NIMH's, getting crazy
5th, 2s lipo, INSANE! Wheelies, wheelies, wheelies! Also many spectacular crashes... I can't imagine 3s lipo, its just not necessary for a 1/10 scale vehicle. But I have one so I'll try it anyhow.
The truck held up very well! I am very impressed. I did hear some clicking from the motor/tranny area but it went away while I was checking it on the stand. Maybe it was just a pebble or somethig else stuck in the drivetrain. Will monitor the situation.
Also, the Castle 5700kv never got over 140 degrees or so, very pleased with the Castle stuff.
WOW!
I made it to the track tonight for some fun runs with my buddy. I took some pics/video, will have to post them.
1st pack, 1800mah, broke it in on that.
2nd, 5000mah, ran very good
3rd and 4th, 8.4v 3300mah NIMH's, getting crazy
5th, 2s lipo, INSANE! Wheelies, wheelies, wheelies! Also many spectacular crashes... I can't imagine 3s lipo, its just not necessary for a 1/10 scale vehicle. But I have one so I'll try it anyhow.
The truck held up very well! I am very impressed. I did hear some clicking from the motor/tranny area but it went away while I was checking it on the stand. Maybe it was just a pebble or somethig else stuck in the drivetrain. Will monitor the situation.
Also, the Castle 5700kv never got over 140 degrees or so, very pleased with the Castle stuff.
#2902
Senior Member
Join Date: Mar 2008
Location: Massillon,
OH
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Some pics and video from the track. Warning for bad driving.
http://s35.photobucket.com/albums/d1...t=MVI_6681.flv
http://s35.photobucket.com/albums/d1...t=MVI_6682.flv
http://s35.photobucket.com/albums/d1...t=MVI_6681.flv
http://s35.photobucket.com/albums/d1...t=MVI_6682.flv
#2903
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
hey all just picked up one of these bad boys. i do have some questions, 1) besides tower where can i get some parts and upgrades for this truck. 2) what are needed upgrades out of the box. 3) can i use beedlocks with the firestorm.
#2904
Senior Member
Join Date: May 2008
Location: PalmerstonOntario, CANADA
Posts: 9,180
Likes: 0
Received 1 Like
on
1 Post
RE: Official E-FIRESTORM thread
I use tower,So i cant help you with that.
No upgrades needed out of the box.(good thing as they dont really make any.)
Yes you can,If you look back far enough on this thread there is info on what bead locks to run.
No upgrades needed out of the box.(good thing as they dont really make any.)
Yes you can,If you look back far enough on this thread there is info on what bead locks to run.
#2905
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
hi sorry for bothering you all, i have looked threw this thread and i do see that beadlocks do work. but can someone show me links to what people know for sure that work.. i heard axial may work and proline, but what size 2.2? do the axial rocksters work. does any bead lock with a 12mm hex work, can i use beadlocks in both the front and back of the firestorm. please help.
#2908
Member
Join Date: May 2008
Location: Singapore, SINGAPORE
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
ORIGINAL: cheech4
hi sorry for bothering you all, i have looked threw this thread and i do see that beadlocks do work. but can someone show me links to what people know for sure that work.. i heard axial may work and proline, but what size 2.2? do the axial rocksters work. does any bead lock with a 12mm hex work, can i use beadlocks in both the front and back of the firestorm. please help.
hi sorry for bothering you all, i have looked threw this thread and i do see that beadlocks do work. but can someone show me links to what people know for sure that work.. i heard axial may work and proline, but what size 2.2? do the axial rocksters work. does any bead lock with a 12mm hex work, can i use beadlocks in both the front and back of the firestorm. please help.
[link=http://www.rcuniverse.com/forum/m_7259802/anchors_8577045/mpage_68/key_/anchor/tm.htm#8577045]beadlocks[/link]
#2909
Join Date: Oct 2007
Location: Kahnawake,
QC, CANADA
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Damn, i was hoping they'd improve it. I used some orange silicone o-rings( in place of the black plastic spacers) to try to seal my storm and it works ok, but every 6-7 races i gotta top off the diff oil
#2910
Senior Member
Join Date: Feb 2006
Location: astoria,
NY
Posts: 6,331
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
ORIGINAL: 73
Will this help?
[link=http://www.rcuniverse.com/forum/m_7259802/anchors_8577045/mpage_68/key_/anchor/tm.htm#8577045]beadlocks[/link]
ORIGINAL: cheech4
hi sorry for bothering you all, i have looked threw this thread and i do see that beadlocks do work. but can someone show me links to what people know for sure that work.. i heard axial may work and proline, but what size 2.2? do the axial rocksters work. does any bead lock with a 12mm hex work, can i use beadlocks in both the front and back of the firestorm. please help.
hi sorry for bothering you all, i have looked threw this thread and i do see that beadlocks do work. but can someone show me links to what people know for sure that work.. i heard axial may work and proline, but what size 2.2? do the axial rocksters work. does any bead lock with a 12mm hex work, can i use beadlocks in both the front and back of the firestorm. please help.
[link=http://www.rcuniverse.com/forum/m_7259802/anchors_8577045/mpage_68/key_/anchor/tm.htm#8577045]beadlocks[/link]
#2911
Senior Member
Join Date: Mar 2008
Location: Massillon,
OH
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
I really like my E-Firestorm!! Which got me to thinking.
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
#2912
Junior Member
Join Date: May 2008
Location: , CT
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Hey gang. Can I ask a couple Q's?
1) I lost my battery brace (wife was "cleaning"...). I was going to order a replacement from HPI ($7)unless you guys can think of another place to order from or a makeshift fix...
2) I would like stiffer springs than the stock ones (which are 3.6lbs and 10 coils and 3.3 lbs and 11 coils). What makes the spring stiffer, the spring rate or the # of coils? Would a jump to 2.7 and 13 coils be too stiff (given I get thicker oil too).
Thanks, Ryan
1) I lost my battery brace (wife was "cleaning"...). I was going to order a replacement from HPI ($7)unless you guys can think of another place to order from or a makeshift fix...
2) I would like stiffer springs than the stock ones (which are 3.6lbs and 10 coils and 3.3 lbs and 11 coils). What makes the spring stiffer, the spring rate or the # of coils? Would a jump to 2.7 and 13 coils be too stiff (given I get thicker oil too).
Thanks, Ryan
#2913
Senior Member
Join Date: May 2008
Location: PalmerstonOntario, CANADA
Posts: 9,180
Likes: 0
Received 1 Like
on
1 Post
RE: Official E-FIRESTORM thread
ORIGINAL: ScottStaypuff
I really like my E-Firestorm!! Which got me to thinking.
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
I really like my E-Firestorm!! Which got me to thinking.
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
#2914
Senior Member
Join Date: Mar 2008
Location: Massillon,
OH
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
On another note, I read that Jato rear wheels fit so I'm going to pick up four unless I hear that it would be bad to use them. Like different offsets or what not...
#2915
Junior Member
Join Date: Jun 2009
Location: Sydney NSW , AUSTRALIA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
hi everyone
just gone to lipo first time today battery is charging.Can someone tell me how to turn the lipo cut off on the car as i can not find my manual anywhere.
just gone to lipo first time today battery is charging.Can someone tell me how to turn the lipo cut off on the car as i can not find my manual anywhere.
#2916
Senior Member
Join Date: Feb 2009
Location: Barrie,
ON, CANADA
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
ORIGINAL: ScottStaypuff
I really like my E-Firestorm!! Which got me to thinking.
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
I really like my E-Firestorm!! Which got me to thinking.
Can we beg HPI for something like an E-Hellfire?? Make it 1/10 scale scale though. Maybe the Cyber buggy could be modified (I'd want gear diffs in a truck for one thing).
#2917
Senior Member
Join Date: Feb 2009
Location: Barrie,
ON, CANADA
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
ORIGINAL: goingmad008
hi everyone
just gone to lipo first time today battery is charging.Can someone tell me how to turn the lipo cut off on the car as i can not find my manual anywhere.
hi everyone
just gone to lipo first time today battery is charging.Can someone tell me how to turn the lipo cut off on the car as i can not find my manual anywhere.
#2918
Junior Member
Join Date: Jun 2009
Location: Sydney NSW , AUSTRALIA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
willstylz
Thanks for the quick reply charging batt at work going to have fun at work today.I throught 7cells was fast cant wait to see how fast with the new 5000 venom lipo 80c burst
Thanks for the quick reply charging batt at work going to have fun at work today.I throught 7cells was fast cant wait to see how fast with the new 5000 venom lipo 80c burst
#2919
Senior Member
Join Date: Feb 2009
Location: Barrie,
ON, CANADA
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
ORIGINAL: rsr427
Hey gang. Can I ask a couple Q's?
1) I lost my battery brace (wife was ''cleaning''...). I was going to order a replacement from HPI ($7)unless you guys can think of another place to order from or a makeshift fix...
2) I would like stiffer springs than the stock ones (which are 3.6lbs and 10 coils and 3.3 lbs and 11 coils). What makes the spring stiffer, the spring rate or the # of coils? Would a jump to 2.7 and 13 coils be too stiff (given I get thicker oil too).
Thanks, Ryan
Hey gang. Can I ask a couple Q's?
1) I lost my battery brace (wife was ''cleaning''...). I was going to order a replacement from HPI ($7)unless you guys can think of another place to order from or a makeshift fix...
2) I would like stiffer springs than the stock ones (which are 3.6lbs and 10 coils and 3.3 lbs and 11 coils). What makes the spring stiffer, the spring rate or the # of coils? Would a jump to 2.7 and 13 coils be too stiff (given I get thicker oil too).
Thanks, Ryan
2) The spring rate is the result of the # of coils plus the width of the wire in the spring can be different sizes to result in a harder/softer spring rate. Don't forget the stock shocks are adjustable. If you turn the adjuster down towards the ground, the spring will be stiffer. And vice versa.
#2920
Senior Member
Join Date: Feb 2009
Location: Barrie,
ON, CANADA
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Goingmad008, I just wouldn't solely rely on the cutoff. It's good to get used to the truck's power and stop using it once you see the performance start to decrease noticeably. The cutoff is there as a safeguard and a warning to you to stop running the truck. If your pack ever became out of balance, you could risk one of the cells going below 6V and damaging the pack.
#2921
Junior Member
Join Date: Jun 2009
Location: Sydney NSW , AUSTRALIA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Willystylz
Mate thanks for that so once performance slows down stop the car.
Whats a good gear for top end speed the car is flux std motor
Mate thanks for that so once performance slows down stop the car.
Whats a good gear for top end speed the car is flux std motor
#2922
Senior Member
Join Date: Feb 2009
Location: Barrie,
ON, CANADA
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Yeah once you start to see the performance dropping noticeably, stop running it. You're not far from the cutoff anyway cause with lipo when you get to that point, the voltage drops quickly.
For top end speed you would have to monitor the motor temp and gear accordingly. I'm not sure what the recommended max temp is for that motor. Probably in the 70-80C range. If you find it's running fairly cool after a full battery pack, then you could go up 1 or 2 teeth in pinion size. If you don't have one, it's worth getting a infrared temp gauge for around $20-25.
For top end speed you would have to monitor the motor temp and gear accordingly. I'm not sure what the recommended max temp is for that motor. Probably in the 70-80C range. If you find it's running fairly cool after a full battery pack, then you could go up 1 or 2 teeth in pinion size. If you don't have one, it's worth getting a infrared temp gauge for around $20-25.
#2923
Senior Member
Join Date: Mar 2008
Location: Massillon,
OH
Posts: 914
Likes: 0
Received 0 Likes
on
0 Posts
RE: Official E-FIRESTORM thread
Well, I'm bummed the Jato wheels are not a direct fit. I'll probably just get more E-Firestorm rims and some street tires for them.
#2924
Senior Member
Join Date: May 2008
Location: PalmerstonOntario, CANADA
Posts: 9,180
Likes: 0
Received 1 Like
on
1 Post
RE: Official E-FIRESTORM thread
ORIGINAL: goingmad008
willstylz
Thanks for the quick reply charging batt at work going to have fun at work today.I throught 7cells was fast cant wait to see how fast with the new 5000 venom lipo 80c burst
willstylz
Thanks for the quick reply charging batt at work going to have fun at work today.I throught 7cells was fast cant wait to see how fast with the new 5000 venom lipo 80c burst
#2925
RE: Official E-FIRESTORM thread
Hey guys, I'm interested in the Flux 10T. I've read somewhere that it can only take up to 2S Lipo or 7-cell NiMH. Is this right?
Cheers
Cheers