Project Mammuth - The Second
#152
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Here is a little video about our first test. We only used 20% throttle and we have some engine issues, but it runned well
[youtube]http://www.youtube.com/watch?v=V66RqJl27Bk[/youtube]
[youtube]http://www.youtube.com/watch?v=V66RqJl27Bk[/youtube]
#154
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Help us to finalize the prototype and start production as fast as possible: http://pleasefund.us/projects/mammuth-rewarron
#155
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Big news around our HQ! The Rewarron will be avaliable in several retail stores around the world for 5.500 USD! We decided to bring it to small serial production!
For more infromation check the news section on our website:
http://mammuthworks.com/2012/10/mamm...-announcement/
For more infromation check the news section on our website:
http://mammuthworks.com/2012/10/mamm...-announcement/
#156
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
What will be under your tree?
Happy holidays and a wonderful new year! Thank you for your support in this year, meet in 2013 with more and more informations
Happy holidays and a wonderful new year! Thank you for your support in this year, meet in 2013 with more and more informations
#157
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Just for you guys, a private video about the third test. We had a lot of issues, the v-belt has a big slip, the springs were too weak and without sway bar we get a serious body roll. At the end our main battery died because of a short circuit in the steering servo, and when happens this? When I go straight to the camera!!! (Nobody hurts)
We put back now the timing belt, we've stronger springs, a sport-exhaust and rebuilt steering servo. We will go for a new test as soon as possible!
[youtube]http://www.youtube.com/watch?v=zdGGPRPEF8o[/youtube]
We put back now the timing belt, we've stronger springs, a sport-exhaust and rebuilt steering servo. We will go for a new test as soon as possible!
[youtube]http://www.youtube.com/watch?v=zdGGPRPEF8o[/youtube]
#158
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Just some inside videos about the development, we're preparing the car for a short ad movie.
Here are the new sprnigs, the dampers were a little bit strong:
[youtube]http://www.youtube.com/watch?v=rTNOVER47mo[/youtube]
Some carb adjustment:
[youtube]http://www.youtube.com/watch?v=4g8Peg1tWV4[/youtube]
Here are the new sprnigs, the dampers were a little bit strong:
[youtube]http://www.youtube.com/watch?v=rTNOVER47mo[/youtube]
Some carb adjustment:
[youtube]http://www.youtube.com/watch?v=4g8Peg1tWV4[/youtube]
#160
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Preparing, preparing...
The engine is still not the best, but we found what was the problem. The carb-manifold sealing has a crack... We fixed it, next test in a few days. The rear spring are still too strong.
[youtube]http://www.youtube.com/watch?v=iXJ-znz3-Gc[/youtube]
[youtube]http://www.youtube.com/watch?v=ZrXZOTRLxdk[/youtube]
The engine is still not the best, but we found what was the problem. The carb-manifold sealing has a crack... We fixed it, next test in a few days. The rear spring are still too strong.
[youtube]http://www.youtube.com/watch?v=iXJ-znz3-Gc[/youtube]
[youtube]http://www.youtube.com/watch?v=ZrXZOTRLxdk[/youtube]
#161
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Before the diff was broke again, it runned well:
[youtube]http://www.youtube.com/watch?v=RNivFJUP6Js[/youtube]
[youtube]http://www.youtube.com/watch?v=RNivFJUP6Js[/youtube]
#162
Senior Member
Join Date: Apr 2011
Location: Leesburg, FL
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
so whats up with mammuth two? it seems yall have just moved on to three without any good baddass running vids... or am i just missing someething. been anticipating seeing it hit thee track.... its a work of art.
#163
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
this is the Mammuth "two" We're preparing it for the shoot of the advertisement movie, which you can see at the end of March (if everything goes well ). We've started MammuthWorks "company" and the Mammuth "two" is our first production car, we call it "Rewarron". When the ad movie will be available, then we will have a brand new website with a surprise...
#164
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
We've changed the final drive ratio from 1:6 to 1:3 because last time the car was a little bit slow. It was just a short run to look how it moves, it looks good! The noise at the end was not a big problem, just a little pinion join mistake, nothing broke
[youtube]http://www.youtube.com/watch?v=nLiqZkTybrc[/youtube]
We've tested the prototype of our worm geared servo. It was just a speed and assembly test. We put together and started to run. The speed is good (0,2 sec / 60 degree) with the calculated torque: 212kg-cm. It ran for an hour, next will be the torque test.
[youtube]http://www.youtube.com/watch?v=gZuy0E7YcbE[/youtube]
[youtube]http://www.youtube.com/watch?v=nLiqZkTybrc[/youtube]
We've tested the prototype of our worm geared servo. It was just a speed and assembly test. We put together and started to run. The speed is good (0,2 sec / 60 degree) with the calculated torque: 212kg-cm. It ran for an hour, next will be the torque test.
[youtube]http://www.youtube.com/watch?v=gZuy0E7YcbE[/youtube]
#166
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
At last we started the shoot of the promo video!
http://projectmammuth.com/second/201...o-video-day-1/
http://projectmammuth.com/second/201...o-video-day-1/
#167
Moderator
RE: Project Mammuth - The Second
Awesome. I've said it before and I'll say it again this car is by far the most impressive RC car I've ever seen. I would love to see it go into production, even in limited amounts. I'd sell my flagship RC boats to drive one of these things!
Keep up the good work.
Keep up the good work.
#168
Senior Member
Join Date: Aug 2006
Location: somewhere
Posts: 3,237
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
im speechless when i see this mammuth rig youve been trying to build , but looks like your struggling with a functional chassis and motor . look at this video follow a traditional chassis platform like this person in the video .
[youtube]http://www.youtube.com/watch?v=Wkmtch_IUB4[/youtube]
[youtube]http://www.youtube.com/watch?v=Wkmtch_IUB4[/youtube]
#169
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
But this is a buggy and ours is a Trophy Truck... BTW this is just a prototype car, the final version will be different
#170
Senior Member
Join Date: Aug 2006
Location: somewhere
Posts: 3,237
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
ORIGINAL: csicso
But this is a buggy and ours is a Trophy Truck... BTW this is just a prototype car, the final version will be different
But this is a buggy and ours is a Trophy Truck... BTW this is just a prototype car, the final version will be different
#171
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Here is a picture from our Mammuth Servo. Test soon.
Specifications:
- 0.2 sec / 60 degree speed
- 213kg-cm rotating torque
- "infinite" holding torque thanks to the worm gear system
- 90, 180, 360 degree rotation
- custom firmware
Specifications:
- 0.2 sec / 60 degree speed
- 213kg-cm rotating torque
- "infinite" holding torque thanks to the worm gear system
- 90, 180, 360 degree rotation
- custom firmware
#173
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
Hey there guys, at last we have some updates! Actually not just one, but two
First: we have a brand new website with lots of cool stuff! We have a nice chart about the car, a new gallery, some development information about the servo and car controller, AND, you can vote what should be our next car in the series So check out [link]http://mammuthworks.com[/link]
But what you should start with is THIS:
Our promo video about the world's first 1:3 scale production R/C car, the Mammuth Rewarron! See it in action and with cool music:
[link]http://www.youtube.com/watch?v=tfgQ_YW8ezA[/link]
Can't wait to see your feedback, let us know what do you think
First: we have a brand new website with lots of cool stuff! We have a nice chart about the car, a new gallery, some development information about the servo and car controller, AND, you can vote what should be our next car in the series So check out [link]http://mammuthworks.com[/link]
But what you should start with is THIS:
Our promo video about the world's first 1:3 scale production R/C car, the Mammuth Rewarron! See it in action and with cool music:
[link]http://www.youtube.com/watch?v=tfgQ_YW8ezA[/link]
Can't wait to see your feedback, let us know what do you think
#174
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
RE: Project Mammuth - The Second
You know our story, you know what we are doing! Do you believe as much in our success as we do? Take a look at our investors wanted page and see what we offer! Companies or individuals could be interested as well!
http://mammuthworks.com/about-us/investors-wanted/
http://mammuthworks.com/about-us/investors-wanted/
#175
Senior Member
Thread Starter
Join Date: Jan 2010
Location: HodmezovasarhelyCsongrad, HUNGARY
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Here is our two latest videos! Enjoy it!
http://www.youtube.com/watch?v=XbAe8X6xlps http://www.youtube.com/watch?v=UeCI8IaLD6g
http://www.youtube.com/watch?v=XbAe8X6xlps http://www.youtube.com/watch?v=UeCI8IaLD6g