Long frame XBE/5ive build
12-09-2014, 04:01 PM
#76
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
12-13-2014, 07:23 AM
#77
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
These are a new set of Moab XL tires that I cut up a few years back. I thought I would share them with you. The bead locks are also glued.
They work awesome because the side wall is 10 times better.
12-14-2014, 05:16 PM
#78
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
12-17-2014, 11:37 PM
#79
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
I didn't do much lately I did take the slipper clutch apart and sand the surfaces and oil the bearing. I made a new solder connection on one of the lipos. I just touched it and it came apart. I'm lucky it didn't cause any problems as it almost always does. Oh I made a strap for the front hood pins also. I should be able to pull them fast if I ever need to and with the cord it is harder to loose the clips also.
12-19-2014, 08:47 AM
#80
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Coulee Dam, WA
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
