King Motors Baja Review with pictures
#1526
Senior Member
Join Date: Feb 2009
Location: CANTON,
OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
ORIGINAL: tim6389
ok good let me know what your plug looks like when the time comes
ok good let me know what your plug looks like when the time comes
#1527
Senior Member
Join Date: Feb 2009
Location: , WI
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
ORIGINAL: ZX9RBART
Well my plug was a little darker than I like. The insulator was dark brown and the electrode was black so I'll lean it out a bit when I get it fixed. I was in the process of tuning it when I broke the shock. One problem I'm having is in the steering. I had to shim the 2 crankbells tonight to get rid of all of the play and I'm still having trouble getting the steering to center correctly. I tried to get the front end apart but the screws that hold the front to the main chassis were stripped on installation so I couldnt completely remove the top plate and therefore had to shim it from the top. Problem there is that my servo saver screw has to be backed off so that it does not dig into the chassis. Hopefully all of the steering balls will loosen up with use.
ORIGINAL: tim6389
ok good let me know what your plug looks like when the time comes
ok good let me know what your plug looks like when the time comes
ohh my buggy is apart now my diff fuild is in that the good news bad news is my bearing wont be in intill next week the bearing that is missing is the one iam taking about..ohhhh i did the wd-40 test and no leaks around the carb or the intake
#1528
Member
Join Date: Mar 2006
Location: Norcross,
GA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
ORIGINAL: tim6389
just for everyone info when you replace the clutch shoes with 15448 - High Response Clutch Shoe & Spring Set besides the hpi bolts you will need the washers part
part number for the clutch bolts are : 15443
the washers are : 15442
I found this out the hard way
just for everyone info when you replace the clutch shoes with 15448 - High Response Clutch Shoe & Spring Set besides the hpi bolts you will need the washers part
part number for the clutch bolts are : 15443
the washers are : 15442
I found this out the hard way
#1529
Senior Member
Join Date: Feb 2009
Location: , WI
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
ORIGINAL: kikcafine
I just reused the stock bolts even though they werent the proper diameter. Ill get the correct ones this week at some point.
ORIGINAL: tim6389
just for everyone info when you replace the clutch shoes with 15448 - High Response Clutch Shoe & Spring Set besides the hpi bolts you will need the washers part
part number for the clutch bolts are : 15443
the washers are : 15442
I found this out the hard way
just for everyone info when you replace the clutch shoes with 15448 - High Response Clutch Shoe & Spring Set besides the hpi bolts you will need the washers part
part number for the clutch bolts are : 15443
the washers are : 15442
I found this out the hard way
ya i know what you mean...the funny thing is wife is looking at me and saying "why are you taking that new buggy apart" lol women just dont understand do they..lol
#1530
Member
Join Date: Mar 2006
Location: Norcross,
GA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
Lol. My girlfriend drove my highlift for the first time (never drove an rc car before) and after maybe 5-6 seconds wanted to know where 3rd gear was! So I went and being me wanting the biggest thing I can get my hands on bought a Baja for the sole reason to take to her parents house and drive in the 200 acres of smokey mountains they have.
#1531
Senior Member
Join Date: Feb 2009
Location: , WI
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
lol now that would be fun wow 200 acres i have a few places to drive my at however once i get the km tune pipe on they may not let me do that ..lol
I will be driving my at the monster truck show next weekend tho well hopefully if i get it back together in time and tune good!!! if not i will have to use my 1/8 scale damn i hope not..lol
I will be driving my at the monster truck show next weekend tho well hopefully if i get it back together in time and tune good!!! if not i will have to use my 1/8 scale damn i hope not..lol
#1537
Senior Member
Join Date: Feb 2009
Location: CANTON,
OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
Just an FYI. Heathobby has the 001 back in stock with chrome chassis and upgraded lcd radio for 499 with free shipping.
#1540
Senior Member
Join Date: Feb 2009
Location: , WI
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
hello all
updated well today i installed the km tune pipe...wow that pipe is loud..lol as for power i dont know yet i couldn't drive it i have all my aftermarket parts installed ( look at my post a few pages back) i also switch out the throttler servo to a hitec hs-5645mg ultra torque in hopes to get more braking power. i did do the c-clip mod to. you guys running the stock clutch shoes you better check them after the 2 tank!!!! the km clutch shoes DONT have much pad on them!!!!!!
updated well today i installed the km tune pipe...wow that pipe is loud..lol as for power i dont know yet i couldn't drive it i have all my aftermarket parts installed ( look at my post a few pages back) i also switch out the throttler servo to a hitec hs-5645mg ultra torque in hopes to get more braking power. i did do the c-clip mod to. you guys running the stock clutch shoes you better check them after the 2 tank!!!! the km clutch shoes DONT have much pad on them!!!!!!
#1543
Senior Member
Join Date: Feb 2009
Location: CANTON,
OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
Got my HPI baja ss shocks today, VERY NICE... the shafts are twice the diameter of the originals. Hopefully up and running soon. PS. dont bleed air from your new shocks while sitting on the couch...ask me why.
#1545
Senior Member
Join Date: Feb 2009
Location: CANTON,
OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
http://cgi.ebay.com/ws/eBayISAPI.dll...m=270350151807 50 bucks on ebay.
#1548
Banned
Join Date: Feb 2009
Location: Taichung, TAIWAN
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
Hi
Anybody know DZYHOBBY?
I am getting this the baja for cheap.. no engine and will add myself a nice 26cc.
www.EngageRC.com
http://www.engagerc.com/servlet/the-...%2C-GAS/Detail
The ship to me cheap.
Looking for zenoah or CY engine now.
Regards,
Anybody know DZYHOBBY?
I am getting this the baja for cheap.. no engine and will add myself a nice 26cc.
www.EngageRC.com
http://www.engagerc.com/servlet/the-...%2C-GAS/Detail
The ship to me cheap.
Looking for zenoah or CY engine now.
Regards,
#1550
Senior Member
Join Date: Feb 2009
Location: CANTON,
OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
RE: King Motors Baja Review with pictures
My 001 (from Heat hobby) came in today and although I am not normally a chrome guy it looks pretty hot with the chrome chassis. This is my 2nd car from them and I must say they have the best customer service in the business, James is wonderful. I will soon be buying a 3rd and it will come from them. Also got my tuned pipe from them today.