E Flight HABU 32- P-20SE Build thread+Videos*
#27
My Feedback: (60)
Join Date: Dec 2001
Location: Mooresville, NC
Posts: 1,480
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Yup....the Sapac wheels are nice but I don't believe there is an option for brakes. The MPI wheels and brakes are the ticket or possibly the BVM light weight wheels and brakes
Sm
Sm
#28
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
All four wing servos have to be mounted on the cover plates. I'm never keen on the joint between end grain hard would and ply so I rough up both to help key in a good bond.
Dw
Dw
#29
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
ORIGINAL: smaze17
Yup....the Sapac wheels are nice but I don't believe there is an option for brakes. The MPI wheels and brakes are the ticket or possibly the BVM light weight wheels and brakes
Sm
Yup....the Sapac wheels are nice but I don't believe there is an option for brakes. The MPI wheels and brakes are the ticket or possibly the BVM light weight wheels and brakes
Sm
Dave
#31
Join Date: Apr 2008
Location: Somerset, UNITED KINGDOM
Posts: 1,343
Likes: 0
Received 2 Likes
on
2 Posts
RE: E Flight HABU 32- P-20SE Build thread+Videos*
[quote]ORIGINAL: smaze17
Yup....the Sapac wheels are nice but I don't believe there is an option for brakes. The MPI wheels and brakes are the ticket or possibly the BVM light weight wheels and brakes
I am assembling a Sapac/Topgun L39 for the P20 and this is the undercarraige system supplied for it. Retract units, legs and wheel brakes.
#33
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Paul
Funny, wife's birthday this weekend[] I'm on suicide watch
The little bits like fitting servo blocks on wing hatches took a time and the wing mods for larger wheels. Will be done when its done.
Dave
Funny, wife's birthday this weekend[] I'm on suicide watch
The little bits like fitting servo blocks on wing hatches took a time and the wing mods for larger wheels. Will be done when its done.
Dave
#34
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Ok. Near completed wings.
The clevis ends need a squeeze to get them closed properly.
String is supplied to pull through cables.
Flap horn angle change works a treat.
Dw
The clevis ends need a squeeze to get them closed properly.
String is supplied to pull through cables.
Flap horn angle change works a treat.
Dw
#35
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Hanging the wings on to check what nose leg length I need. Sit is good with the 2" wheels.
Also as Ali pointed out the wings have some movement, but this is all in the existing two pegs-the fuselage holes are over sized, so I'll sleeve them.
Dw
Also as Ali pointed out the wings have some movement, but this is all in the existing two pegs-the fuselage holes are over sized, so I'll sleeve them.
Dw
#37
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
During a few spare moments, I have painted the wood tray and made the rear tail pipe support former. Also had the tank pressurised all day and a dunk in the sink shows zero bubbles. Result. Double result Mrs W has decided after her party to take the girls to France for the HT week, so I can crack on, with William as coffee provider[8D]
Dw
Dw
#38
RE: E Flight HABU 32- P-20SE Build thread+Videos*
ORIGINAL: Dave Wilshere
with William as coffee provider[8D]
Dw
with William as coffee provider[8D]
Dw
"William Wilshere - M&R - refreshments and entertainment manager"
#40
My Feedback: (55)
Join Date: Mar 2005
Location: Mission Viejo, CA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Hi Dave,
Just wondering, looks like you just recieved your HABU 32 few days ago.(2-15) which would mean yours was part of the first shipment which was just recieved. I have had an order in since last November and I just called them on the status and I was told the first shipment has had issues at the factory and its delayed till end of next month? Are you a dealer and get preference on the shipments? It seems to me they are not being totally truthfull.
thanks
jason
Just wondering, looks like you just recieved your HABU 32 few days ago.(2-15) which would mean yours was part of the first shipment which was just recieved. I have had an order in since last November and I just called them on the status and I was told the first shipment has had issues at the factory and its delayed till end of next month? Are you a dealer and get preference on the shipments? It seems to me they are not being totally truthfull.
thanks
jason
#41
My Feedback: (106)
RE: E Flight HABU 32- P-20SE Build thread+Videos*
ORIGINAL: Dave Wilshere
During a few spare moments, I have painted the wood tray and made the rear tail pipe support former. Also had the tank pressurised all day and a dunk in the sink shows zero bubbles. Result. Double result Mrs W has decided after her party to take the girls to France for the HT week, so I can crack on, with William as coffee provider[8D]
Dw
During a few spare moments, I have painted the wood tray and made the rear tail pipe support former. Also had the tank pressurised all day and a dunk in the sink shows zero bubbles. Result. Double result Mrs W has decided after her party to take the girls to France for the HT week, so I can crack on, with William as coffee provider[8D]
Dw
#42
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
ORIGINAL: Da ROOK
Hi Dave,
Just wondering, looks like you just recieved your HABU 32 few days ago.(2-15) which would mean yours was part of the first shipment which was just recieved. I have had an order in since last November and I just called them on the status and I was told the first shipment has had issues at the factory and its delayed till end of next month? Are you a dealer and get preference on the shipments? It seems to me they are not being totally truthfull.
thanks
jason
Hi Dave,
Just wondering, looks like you just recieved your HABU 32 few days ago.(2-15) which would mean yours was part of the first shipment which was just recieved. I have had an order in since last November and I just called them on the status and I was told the first shipment has had issues at the factory and its delayed till end of next month? Are you a dealer and get preference on the shipments? It seems to me they are not being totally truthfull.
thanks
jason
No, the UK's dealer delivery won't arrive till March either, this was a kit flown over especially for me. I was promised one last year and that never made it. It is normal to get some flown in for magazines, press and sponsored pilots (as Ali). I just have a good relationship with Horizon and have always helped promote items. The idea of this kit was to allow another conversion to be done and everyone know what to do before the main batch arrives. Modellers being big kids, I have already had quite a few people buy the other parts required to do the Habu 32 (both EDF and Turbine) so all they need is the kit.
hooker53
Yep, my son is already planning our fast food diet for the week
Dave
#44
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
OK, Mrs W and girls off to the flat in France, so back to the build.
Overflow fitted, carbon rod is sitting flat on the fuselage botton to show clearance if a gear up landing is required.
Flat ground on leg for wheel, always grind these short of the end.
Dw
Overflow fitted, carbon rod is sitting flat on the fuselage botton to show clearance if a gear up landing is required.
Flat ground on leg for wheel, always grind these short of the end.
Dw
#45
Banned
Join Date: Jul 2004
Location: England, , UNITED KINGDOM
Posts: 2,725
Likes: 0
Received 1 Like
on
1 Post
RE: E Flight HABU 32- P-20SE Build thread+Videos*
ORIGINAL: Dave Wilshere
In Europe we don't have the same rule. Tams or possibly Sepac wheels are brakes might work for you.
Dave
ORIGINAL: smaze17
Guys, I may have missed it but what are y'all using for wheels and brakes? I believe the AMA requires the use of them here in the states. Something that isn't too heavy. Me thinks maybe the MPI aluminum wheels and brakes that Tam sells? I had them on a 1/12 F-16 so I think they would work well??
Thx
Spence
Guys, I may have missed it but what are y'all using for wheels and brakes? I believe the AMA requires the use of them here in the states. Something that isn't too heavy. Me thinks maybe the MPI aluminum wheels and brakes that Tam sells? I had them on a 1/12 F-16 so I think they would work well??
Thx
Spence
Dave
Dennis
#46
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Wings were completely finished last night, decided to paint the wheel wells duck egg blue
Legs are nice and stiff, so don't think they will bend.
Dw
Legs are nice and stiff, so don't think they will bend.
Dw
#49
Senior Member
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Jep, I've got those main and nose oleo's also installed on my Cougar, way better looking then wirelegs.
#50
Thread Starter
RE: E Flight HABU 32- P-20SE Build thread+Videos*
Rudder servo (JR 362) in with cut down Super servo arm) I didn't look at the horn alignment before I bonded in the control horn and it does not line up on my kit. The horn is large and rigid, so I used a Graupner ball-link. Cover in place and detail of wing fixing screws. You'll need a 9/64 ball driver
Dw
Dw