Shaun Evans

Hi,

Can someone point me to a diagram on how to plumb this thing?? Even a cocktail napkin drawing would be great...

Dustin Buescher

Air in to the nipple closest to the button, NC. Line to the close side of the cyl from the OUT port, which is the middle nipple. The end nipple is a vent, nothing connects to it, labeled NO.

joeflyer

My Feedback: (48)

From Robart's website. Like Dustin said.

Shaun Evans

Hi,

Thanks, guys.

FenderBean

There is a drawing in my f16 build thread, I used it for my canopy lock.

Spit_1

Hi,
Please could you explain me how the valve is working?
Which port is switched if the button is pushed and which port is working if the button is released.

Thanks, guys!

joeflyer

My Feedback: (48)

The nipples are labeled NC, OUT, and NO. When the button is up, OUT is connected to the Normally Open nipple. When the button is pushed, OUT is connected to the Normally Closed nipple and NO is closed.

Joe

Spit_1

Have many thanks Joe!