BVM MAVERICK FLAP'S
#3
My Feedback: (57)
RE: BVM MAVERICK FLAP'S
No one cares, its all about Large Hawks and $14,000 A4's that dont work.
I had a Mav and as much as I can remember it used nylon flat type hinges, bonded against the split flap top skin and the inner skin of the balsa sheeting of the wing. Really nothing to it, if memory serves me well.
A friend of mine did a mod to replace the split flap with a normal full bodied one. Just cut the flap off of the wing and sheet every surface that has an exposed section of foam core, then hinge at the very bottom.
Good luck,
David
I had a Mav and as much as I can remember it used nylon flat type hinges, bonded against the split flap top skin and the inner skin of the balsa sheeting of the wing. Really nothing to it, if memory serves me well.
A friend of mine did a mod to replace the split flap with a normal full bodied one. Just cut the flap off of the wing and sheet every surface that has an exposed section of foam core, then hinge at the very bottom.
Good luck,
David
#7
Join Date: Mar 2006
Location: West KirbyWirral, UNITED KINGDOM
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
RE: BVM MAVERICK FLAP'S
Hi Adam, all the above posts are correct. I have just done mine, (full depth with standard bottom hinging) Why do you ask? yours is complete, Ron.
#9
Join Date: Dec 2008
Location: Spartanburg,
SC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RE: BVM MAVERICK FLAP'S
If you still need it I have a standard Maverick, stopped mid-stream in the building phase years ago. Still have all the documentation, so I can send you the exact info from the manual and picture pages. Would be able to send them right after Christmas. Just let me know.
#10
RE: BVM MAVERICK FLAP'S
Hi Adam:
You can make the hinges like composite wing, you must retire half balsa cover and put into the nylon hinge, them cover again with balsa and them apply fiber glass. Is like built the wing in foam with the nylon hinge but with a wood and ribs wing.
I show you a photo of my foam wing with nylon hinge.
BR form Spain.
Carlos Márquez
____________________________
http://cmjets.blogspot.com.es/
You can make the hinges like composite wing, you must retire half balsa cover and put into the nylon hinge, them cover again with balsa and them apply fiber glass. Is like built the wing in foam with the nylon hinge but with a wood and ribs wing.
I show you a photo of my foam wing with nylon hinge.
BR form Spain.
Carlos Márquez
____________________________
http://cmjets.blogspot.com.es/
#14
RE: BVM MAVERICK FLAP'S
Hello friends:
I buy this nylon hinge here:
http://www.maquelar.com/
you click in "tienda online" them in "varios" and you find:
Cinta para bisagras 20mm ancho
Cinta de nylon especial para bisagras full-span tanto para alas forradas en madera como en fibra de vidrio. Tejido suave y resistente al uso. Paquete de 5m.
Grupo: 20 Ref: PPL-20 Precio: 4,40.- €
I don´t know if sell out Spain, but if not you send me a PM and I can send you, no problem.
Carlos Márquez
__________________________________
http://cmjets.blogspot.com.es/
I buy this nylon hinge here:
http://www.maquelar.com/
you click in "tienda online" them in "varios" and you find:
Cinta para bisagras 20mm ancho
Cinta de nylon especial para bisagras full-span tanto para alas forradas en madera como en fibra de vidrio. Tejido suave y resistente al uso. Paquete de 5m.
Grupo: 20 Ref: PPL-20 Precio: 4,40.- €
I don´t know if sell out Spain, but if not you send me a PM and I can send you, no problem.
Carlos Márquez
__________________________________
http://cmjets.blogspot.com.es/
#15
My Feedback: (48)
RE: BVM MAVERICK FLAP'S
The Maverick came with Hayes Poly hinges. I have used them on the flaps and other control surfaces on my Maverick and on a number of other planes. They hold up very well. I've had no issues with them and 250 flights on one jet. Your local hobby shop may have them. If not they're available from Tower. http://www3.towerhobbies.com/cgi-bin...?&I=LXK840&P=7
Joe
Joe
#16
Senior Member
My Feedback: (85)
RE: BVM MAVERICK FLAP'S
http://www.hobbyking.com/hobbyking/s...H1_H2_5pc.html
http://www.hobbyking.com/hobbyking/s...0pcs_bag_.html
These look like a possible substitute for the nylon hinge.
http://www.hobbyking.com/hobbyking/s...0pcs_bag_.html
These look like a possible substitute for the nylon hinge.